| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: Rear break disc's  (Read 2216 times)
krede
YaBB God
*****
Posts: 1166



« on: March 20, 2011, 07:42:12 am »

I have disassembled the rear breaks as they had seized after 3 years off the road.
Discs have a some grooves in them, but not too bad.
I can get them skimmed at work though, so what can anybody tell me the minimum thickness? (2.2 discs).. 9mm?

Also what's the torque of the hub nut?
Logged
Oetker
YaBB God
*****
Posts: 1048



« Reply #1 on: March 21, 2011, 08:26:19 am »

Torque 25 daNM

minimum thick brake discs after skimming 10 mm end of life 9 mm
« Last Edit: March 21, 2011, 08:33:19 am by Oetker » Logged

I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
krede
YaBB God
*****
Posts: 1166



« Reply #2 on: March 21, 2011, 03:44:58 pm »

Thanks Oetker Smiley
Logged
klumzer
Sr. Member
****
Posts: 370



« Reply #3 on: June 07, 2011, 05:46:54 pm »

Hello,

Could anyone send me a similar figure of the Murena 2.2 rear brake disc?

I only have the 1.6...
Logged
roy4matra
YaBB God
*****
Posts: 873



« Reply #4 on: June 08, 2011, 01:29:43 am »

Hello,

Could anyone send me a similar figure of the Murena 2.2 rear brake disc?

I only have the 1.6...

1.6 and 2.2 are the same.  The only difference is the 2.2 disc is larger in diameter to provide extra metal for absorbing and getting rid of the extra heat.

Roy
Logged

klumzer
Sr. Member
****
Posts: 370



« Reply #5 on: June 08, 2011, 05:34:47 pm »

So, you mean that the fig is perfect except for the largest diameter which is 260mm instead of 234.

Technical descriptions are a bit confusing concerning diameters of discs.


Thanks.
Logged
Pages: [1] Print 
« previous next »
Jump to: