| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: Tightening torque - suspension bridge?  (Read 3021 times)
njesper
Sr. Member
****
Posts: 125



« on: November 01, 2009, 04:00:57 pm »

Dear fellow matra-dudes,

I am curious to know, how much torque (nm), the bolts have to be tightened, when speaking of the four bolts, holding the suspension bridge to the chassis?  Embarrassed



My murena manual, says nothing of this, and I can see the nuts (with the small housing around them), are the same on the bagheera, so if anybody can come up with this info, I would be very happy. Also if anybody have extra nuts like the ones shown in the picture, please reply.  Grin

Best regards,

Jesper
Denmark
Logged
joe
Newbie
*
Posts: 9


« Reply #1 on: November 02, 2009, 06:44:00 pm »

hello
murena's are biggers than bagheera's
on bagh, torque is 5 mkg
Logged
Spyros
Sr. Member
****
Posts: 323

I'm a real donkey!


WWW
« Reply #2 on: November 02, 2009, 07:09:45 pm »

hello
murena's are biggers than bagheera's
on bagh, torque is 5 mkg

Mais qu'est-ce qu'tu fais ici, toi ?  Cheesy
Logged
Pages: [1] Print 
« previous next »
Jump to: