| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: Changing the bearing on the Mac Person suspension.  (Read 1914 times)
2cv
Jr. Member
**
Posts: 28


« on: April 30, 2011, 08:34:40 am »

I need to replace the bearing on the front suspension do I need to dismantle the unit or is it enough to unbolt the unit from the car to fit the bearing?
Would any of you have a exploded drawing of the unit?

Best regards
Lars
Logged
jack daniels
Sr. Member
****
Posts: 132



« Reply #1 on: April 30, 2011, 09:56:41 pm »

the spring/ shockabsorber assy must come out and you'll need a spring compressor.

It's best to replace the top bush that's on the top of the spring at the same time.
SKF have a set with the 4 required parts which is pretty cheap.


SKF part number:    VKDA 35620T      about 100 euro.

 ( 2 assembly drawings are below, log in to view )
« Last Edit: May 01, 2011, 10:53:26 am by jack daniels » Logged

Espace, Grand (magnifique, formidable, grandiose, considérable, noble, ample) III  
2002   JE02   F4R  DP0   2.0L 16v auto
2cv
Jr. Member
**
Posts: 28


« Reply #2 on: May 01, 2011, 11:13:12 am »

Thanks Jack

Just what I need, I will order new sock absorber since everything has to be taken apart.

Lars
Logged
Pages: [1] Print 
« previous next »
Jump to: