| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: Studbolts  (Read 1378 times)
RazorbackNOR
Sr. Member
****
Posts: 494



« on: June 19, 2013, 05:09:31 pm »

Does anybody know the size(thread and lengths) of the studbolts used on the intake and exhaust manifolds?
I have plans of replacing some parts, and since these break far too easy since they probably havn't been touched for 30 year, a way to get some quicker than Simon is preferable.
Logged

2010 Mazda 3 1,6  Diesel Gunmetal Blue
1983 Matra Murena 2.2 Platine
50cc Pocketbike
IPSC shooter
GP
Sr. Member
****
Posts: 245



« Reply #1 on: June 21, 2013, 10:04:58 am »

Hi,

Exhaust M8 x 1.25  x  approx. 45mm

My local Motor Factor Supplied total length 45mm with 22.5mm length thread one end and 12.5mm length thread the other with a 10mm length unthreaded bit in-between which did the job.
 

Inlet M7 x 1.00 x approx 45mm.  Similar arrangement as the exhaust regarding thread lengths.

Cheers,

GP
« Last Edit: June 21, 2013, 10:08:11 am by GP » Logged
Pages: [1] Print 
« previous next »
Jump to: