| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: Politecnic's camshafts  (Read 3334 times)
Godallmighty
Newbie
*
Posts: 2


Speed Deamon


« on: September 23, 2006, 01:19:46 am »

Planning to upgrade my Murena (2.2S Engine) and have been looking at the camshafts that are sold by Politecnic. Have tried to find some information on their “maxi route” camshaft (lift 7.60 mm  - 260° ad. X 296° Ech.) on how driveable it is and what range it has in form of performance.

Is there anyone on this forum that might have some info on the behaviour of the above camshaft? Thanks!

Cheers
Leo
Logged

Matra Murena 2.2 - 83
Matra_Hans
YaBB God
*****
Posts: 642


Owner of Bagheera, Rancho, Murena & Espace


« Reply #1 on: September 23, 2006, 08:57:12 am »

Hi
I have a Politecnic 152 cv camshaft in my 2.2 (I do not know if the 152cv cam is the same as the maxi-route) But anyway I find the 152 cv converted engine very drivable, no problems at all.
Regards Hans
Logged
Godallmighty
Newbie
*
Posts: 2


Speed Deamon


« Reply #2 on: September 23, 2006, 12:04:56 pm »

Tanks for your reply, but it's not the same as the "152 cv camshaft" (152 hp). The "Maxi route" is supposed to deliver much more effect than the 152 cv, and I was curios on if it still had low and mid register... or if the low register was gone, making it unusable for normal driving.
Logged

Matra Murena 2.2 - 83
Pages: [1] Print 
« previous next »
Jump to: