| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: Terrible metal scratching noise  (Read 7705 times)
José V. Gavilá
Full Member
***
Posts: 97


1999 Espace 3.0 V6 24V


WWW Email
« on: April 24, 2012, 07:46:27 am »

Hi all,

After some nice motoring months with my Espace, today, when arriving to work, I have opened the window while still at slow movement, and have heard an strong metal scratching noise. It was so loud that I have thought someone was drilling metal :o !. But then, when entering the parking, I have noticed that the noise was following me  :( ... Even driving very slowly, the noise was very strong.



I have opened the bonnet, as I was even suspecting of an automatic  transmission problem (yes, it was that bad!) but, luckily, it seems OK. I am thinking along the line of a brake problem, as I recall some time ago a mechanic told me that rear discs were about to expire...

After just about 5 minutes, a work colleage has arrived and I have tried to reproduce the noise by driving in the parking, but it has refused to appear... I have heard some lighter screeching noise from a rear brake, which I think it is telling me that some pad is asking for replacement  ???... perhaps this is all that has happened, but I would like to have your confirmation (if this strong scratching noise I have heard could be due to that), as I need to drive about 20km to my Renault garage (yes, I won't try to do the work by myself as I have lots of other work to do and just have no time!)

Thanks for your help.

Regards,

JOSE
« Last Edit: April 24, 2012, 07:50:18 am by José V. Gavilá » Logged

JOSE V. GAVILA
La Canyada (Valencia)
SPAIN

http://jvgavila.com
William123
Jr. Member
**
Posts: 31


Email
« Reply #1 on: April 24, 2012, 11:21:50 am »

Hi, sounds like brake pad or disc problem, or possible wheel bearing. noise probably changed after things cooled down.  Take the wheel off and there should be some more clues evident. :)
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF 2.0.19 | SMF © 2006-2008, Simple Machines LLC