|
Home
|
Blogs
|
Help
|
Search
|
Login
|
Register
|
MatraSport Forum
>
Each model
>
Murena
>
inlet flange CAD drawings (2.2)
« previous
next »
Pages:
[
1
]
Print
Author
Topic: inlet flange CAD drawings (2.2) (Read 18663 times)
krede
YaBB God
Posts: 1172
Email
inlet flange CAD drawings (2.2)
«
on:
June 26, 2011, 07:05:32 am »
For having a flange laser cut for a new inlet manifold. Are there any out there?.
Logged
RazorbackNOR
Sr. Member
Posts: 494
Email
Re: inlet flange CAD drawings (2.2)
«
Reply #1 on:
June 27, 2011, 07:08:19 am »
If you have the measures, I could make the drawing for you.
I don't have access that deep inside the engine to get them on my Murena.
Logged
2010 Mazda 3 1,6 Diesel Gunmetal Blue
1983 Matra Murena 2.2 Platine
50cc Pocketbike
IPSC shooter
krede
YaBB God
Posts: 1172
Email
Re: inlet flange CAD drawings (2.2)
«
Reply #2 on:
June 27, 2011, 07:40:52 am »
Thats very kind of you, but don't bother. I have an inlet gasket that I will scan. I think it is possible to import this into autocad somehow
Logged
RazorbackNOR
Sr. Member
Posts: 494
Email
Re: inlet flange CAD drawings (2.2)
«
Reply #3 on:
June 27, 2011, 08:43:21 am »
Use Inventor instead, much easier to import and use, and you can make all parts in 3d easily and check that all fit together. I do use both programs on a daily basis.
Logged
2010 Mazda 3 1,6 Diesel Gunmetal Blue
1983 Matra Murena 2.2 Platine
50cc Pocketbike
IPSC shooter
krede
YaBB God
Posts: 1172
Email
Re: inlet flange CAD drawings (2.2)
«
Reply #4 on:
June 27, 2011, 08:47:56 am »
So... perhaps you could be perusaded to make me a drawing after all?
Logged
Pages:
[
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
J
-----------------------------
-----------------------------
M
-----------------------------
-----------------------------
0
-----------------------------
Loading...