|
|
michaltalbot
YaBB God
Posts: 566
|
|
« Reply #2 on: July 19, 2008, 09:02:05 am » |
|
You don't need to cut it there are only 6 screws which has to be demounted and You don't need to demount those big ones which are on both sides (painted and rusty from inside). First of all, I'm allways demounting the headlamps (I won't write how, think You know it). First two screws are on the top, I think You have allready found them, second ones are down there, where are plastic housings for bar which open/close headlamps, the are holding also the long distance lights (you don't need to demount it by parts, just demount these two small screws, and you give away the bumper with lights and holders), and at least You must to demount small screws which are inside the corners of bumper. You will find them when You'll look straight into the upper corner of the bumper from the inside, they are holding the metal strip (which is not possible to demount, because those big screws are too rusty) to the chassis. And on the opposit side of this metal strip, there are two rivets, which You have to route away. That's all
|
|
« Last Edit: July 19, 2008, 09:06:11 am by michaltalbot »
|
Logged
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|