Title: Espace 3 Manual
Post by: sjguk on April 22, 2012, 08:40:26 pm
Hi everyone,
Whilst searching for the RTA Espace manual online I came across this website:
http://www.scribd.com/doc/17758536/Rta-Renault-Espace-III-19972002
It has the manual page by page, although it's in French, you can highlight passages of text and paste them into google translate easily enough.
Don't bother to try and download unless you want to pay and subscribe to the sites owners. Nothing is free in this world!!!
I thought it may help somebody out.
My own Espace has a blown head gasket after the water pump failed and I am trying to gain the courage to remove the head, I realise the engine has to drop down through the bottom of the car :o.
Hope it helps!
Stuart
Whilst searching for the RTA Espace manual online I came across this website:
http://www.scribd.com/doc/17758536/Rta-Renault-Espace-III-19972002
It has the manual page by page, although it's in French, you can highlight passages of text and paste them into google translate easily enough.
Don't bother to try and download unless you want to pay and subscribe to the sites owners. Nothing is free in this world!!!
I thought it may help somebody out.
My own Espace has a blown head gasket after the water pump failed and I am trying to gain the courage to remove the head, I realise the engine has to drop down through the bottom of the car :o.
Hope it helps!
Stuart
Title: Re: Espace 3 Manual
Post by: BrianM on April 23, 2012, 01:08:18 pm
Just so you know, you can remove the head without removing the engine. It's a little tight for space & you will need a jack under the engine but it can be done.
Title: Re: Espace 3 Manual
Post by: sjguk on April 23, 2012, 07:08:58 pm
Brian,
Can you just lower the engine within the bay then?
Would you still need to separate the driveshafts from the hubs, or will the suspension drop enough with the engine?
Cheers,
Stuart
Can you just lower the engine within the bay then?
Would you still need to separate the driveshafts from the hubs, or will the suspension drop enough with the engine?
Cheers,
Stuart
