|
|
|
|
|
|
|
|
roy4matra
YaBB God
Posts: 1201
|
|
« Reply #38 on: July 31, 2009, 07:05:43 pm » |
|
I will now refit the radiator as soon as I have found some stainless steel wire to make a new cable for the headlight inhibitor mechanism I would like to re-instate this mechanism on my car but so far haven't managed to find a car with it fitted and working to look at. Could you let us know how you get on, with photos if possible please? It's fairly straight forward Peter. The bonnet lock mechanism should have a pivoting bar that in one position blocks the bonnet release from operating, and when pivoted the other way allows it to work. So first thing is - is this still fitted? The cable goes from the lever that is pushed and pulled by the double acting servo that lifts and lowers the light pods. So when the servo pushes the bar forward, the cable is moved and the pivoting bracket on the bonnet mechanism swings around to block the release. To take photos you need the nose/bumper off, and although my car has a working system the bumper is obviously fitted! If John has his apart, maybe he can takes some photos to post here. Roy
|
|
|
Logged
|
|
|
|
|
|
|
|
|
|