I don't think Carjoy has a new board that also replaces the original plugs to the edges of the board.  So if you have poor or broken jaw terminals in those plugs, then you need something different.  Carjoy (and Simon Auto) have a new board that uses the new blade fuses rather than those old and poor continental plastic or ceramic fuses which are prone to be so bad but at a cost of 145 Euro plus tax.  Carjoy also has some new production of the old style board with the old continental fuses at a slightly cheaper price (125 Euro plus tax).  But all these new boards still use the existing plugs to the edges of the board.




What you need is one of the boards I modify to use a different plug and socket.  The socket is soldered to the board, so you have the best connection possible.  But you have to replace the four plugs with the matching plugs I supply.  That mens you have to cut all the wires from the old plugs and fit them into the new plugs, which can then be connected to the modified board.

You also have a choice of fuse type.  I can leave the original style fuse holders and fuses, or I can change them to the better English fuse holders and glass fuses which make a much better positive contact.  I cannot fit the new blade fuse holders as they require a completely different circuit board layout because of their different (closer) contact spacing.  That is why I fit the glass fuses as the spacing is virtually the same as the original continental fuses.

See: http://www.matrasport.dk/forum/index.php/topic,3309.0.html

I can modify your board if it is good enough, or I can possibly supply another board at extra cost.  This will be either an old board that I can modify or it could be a new board, but that will increase the cost even more of course.

Send me some photos of your board, so I can see if it is good enough to modify.

Roy

The edge terminals on my car are very wonkey and some are broken and i tried looking for those little jaw edge terminals but they ssem to be discontinued. I also chased down the French made one by JMI83 but as far as I could understand he stopped making them and seems to have sold the last of his stock just a few months ago. However I also believe someone else is continuing it and there's a similar board from Belgium? Or maybe those are from the same person. Long story short, I would like a new one, particularly one that does away with the old type of connectors. I know carjoy has them but I heard so many bad things about them from local guys at the club that I prefer not to support them and the ones from Simon seem to rely on the old edge terminals.
I also found this video but the websites at the end say "page not found" and I'm a bit hesitent towards mailing random e-mail addresses I see in a video with a question if I can buy something from them 😅 It's a bit too easy for anyone receiving that to say "sure send me money" if you know what I mean
Hope someone can help me find what I'm looking for.

At the ELMS race in Barcelona today (2024/04/14) the No 28 Oreca of Team Idec Sport sites on second place - with a lovely decal on the tail-fin :-)



Team Idec have been at Le Mans 24H many times, so I hope they will keep this sponsorship for this years Le Mans - and do well .... :-)



/L

I finally made some progress yesterday refitting parts on the engine. Some trivial vira and very cold weather has kept me away so it was good to get back in the garage. I got a chance to take a picture of the o2 sensor installation on the exhaust manifold, which I'm very satisfied with.

I understand why you want to sell it as it's a robust and very functional car. I have no good suggestions for how to advertise it in the UK as I'm in Denmark, but I'm happy to see you want to see it preserved. I let my 2001 Espace go last year to the car-heavens.

/Anders

Matra returns to Le Mans as sponsor of French LMP2 team IDEC.SPORT

Seen on Instagram: https://www.instagram.com/idecsportracing

I have a 1994 Renault Espace which I no longer need. I haven't got as far as advertising it yet. This message is to ask advice on how to sell it. It's in southern England, functional, taxed, insured and freshly MoT'd -- but high mileage at around 212,000 miles, the paintwork is tatty and the aircon has a slow leak. It was family transport for over 20 years. The web site howmanyleft.co.uk suggest there about 70 "Espace II" still running, or just 4 of this model (RXE). I have no idea whether that makes it a useless lump of rust, or a potentially wanted modern classic.

How much effort should I put into advertising this, and where should I try to advertise?

Photos might follow. It needs a second attempt at a good clean before I get out the camera!

Thanks, this one is the same Simon Automobile offers. For 128€ I´ve found on, that ist like the original. It is from a Citrön Visa petrol engine.

You car get one here:
https://en.oreca-store.com/aluminium-radiator-xtrem-motorsport-matra-murena-with-bracket.html
not cheap but good, I got one myself from Politecnic.
regards Hans

It is the radiator with plastic parts at the sides....