|
|
|
|
|
|
Anders Dinsen
Administrator
YaBB God
Posts: 3186
WWW
|
|
« Reply #6 on: May 08, 2008, 06:09:17 pm » |
|
Okay, some more of "This canīt be.....? ".... Does anybody know what this connector connects, and if it should look like this inside.....? Of course It is one of the three connectors connecting the front wiring loom to the rear wiring loom. It looks a bit greasy, but that's in fact a good thing as long as there are proper connections. The grease helps keep water away, and water is the worst enemy of these connectors as it causes corrosion, bad connections, hot connections, and eventually melted housings. I note that the housings here look okay, and apart from the greas, it also looks like the tabs in the housings are okay too. I suggest you clean the old grease out, carefully inspect the tabs, and then regrease it all using silicone grease. I.e. nothing to worry about
|
|
|
Logged
|
1982 Talbot Matra Murena 2.2 prep 142 2017 BMW i3 "Charged Professional" 94Ah
Used to own: 2001 Renault Matra Grand Espace "The Race" V6 24v 1997 Renault Matra Espace 2.0 8V 1987 Renault Matra Espace J11 2.2
|
|
|
|
|
|
|
|