The Espace Murena web site contains a scan of the workshop manual, but unfortunately they haven't scanned the part about steering, which is where the numbers are. But this is what I have in my (German) copy of the manual:
Front:
Caster: 4°±20'
Camber: -0°20' ±10'
Toe in: 0 - 2 mm
Rear (not adjustable):
Camber: -1°30' to -2°
These measurements are specified under the following circumstances: Full tank, 40 kg in trunk, 2 x 70 kg in the seats. This should result in the following clearances:
Front: 153 mm
Rear: 201 mm
The clearance on the front is adjustable, and is even in a section that has been published on Espace Murena
Take a look at this:
http://www.espace-murena.com/Fichiers/ManuelAtelier/Ka0a602.pdfFollowing page shows how to make the clearance measurement:
http://www.espace-murena.com/Fichiers/ManuelAtelier/Ka0a603.pdfI think this should get you started
- Anders