MatraSport Forum

Hi,

I have a few parts left after the "Schlachtfest" yesterday  :D

Let me know if any of the following are usefull to you:

Rear window
Window between cabine and engine
Front seat and right hand passenger seat in brown velour (ok condition)
Speedo unit
Carb. (orig. Solex for 2.2)
Wheels (needs refurb)
Heat fan/blower
Exhaust manifold (2.2 orig. mild steel, near perfect condition, no cracks etc.)


All at reasonble prices, can be shipped at buyers cost.

Here's pictures of those of the remaining parts, which I managed to take photos of:

(http://gallery.dinsen.net/d/9048-2/DSC_6671.JPG)

Speedo (dirty, but intact):

(http://gallery.dinsen.net/d/9105-2/DSC_6758.JPG)

Dash:

(http://gallery.dinsen.net/d/9033-2/DSC_6649.JPG)

Oh... thank you Anders!

And the very nice looking speakers in the last picture is also up for grabs  :o

There's a good chance the speedo and wheels have allready been sold.

By the way Anders, seems like Finn might take the conrods, pistons etc. as he might have to take yet another closer look at the engine  :(
Also, what part did Otto take for his oil pressure gauge, cause Finn would like the speedo unit, as he is having problems monitoring the oil pressure and this might be the reason for all his engine trouble...

As long as the pistons and conrods don't get scrapped, that's good. If Finn can use them, excellent (though for him I would have preferred if he couldn't - I'm afraid he's training for the world championship in Murena engine removal :(

Otto took the oil level electronics, that has nothing to do with the pressure gauge. I think Hans took the pressure sender on the engine, but it's better to get a new one anyway.

Oh yes, the speakers....... HiFi....... need I say more??
BTW: Where were they fitted?

The silver speakers where fitted in the door panels that Jesper took...

Finn told me he have allready checked the pressure sender, and it seems to be fine.
Yes it seems like Finn haven't been lucky at all... I believe it's the 3rd engine renovation within a year!  :-\

Those brown seats looks thaey are in a much better state than mine. I would like to have those, but how to get them :-\

Hmm...  ???

Good question... I can try to get a price for shipping, but I guess it will be to expensive!

You're not planning on going to Denmark shortly  ;)

Unless there is a big classic car event ;)

I think shipping will cost the same as leather seats from carjoy.

I am not very seriousy interested in these seats, but they will improve my interior a lot!

Hi Bart,

Shipping to NL would be approx. 70-80€... not to bad.

How are the wankel project going?

hi
do you have a left rear suspensionarm? 1.6?

Hi Oskar,

Yes I have one from my HDI project car that I don't expect to use anymore.
Though I was planning to keep it in case I would like to convert it back sometime.

If you need one, I don't mind selling it...?

Regards,
Valdemar

Hej
Jeg står og mangler en vacuum beholder til forlygterne på Matra Murena 83 (en af dem der sidder foran ved lygterne). Har du sådan een og så fald - hvad skal den koste?

Mange hilsner
Per Nørgaard

Hej Per,

Jeg skal lige dobbelt tjekke, men mener jeg har en beholder, desværre er den ikke i særligt god stand.

Den skal ikke koste mange DKK, hvis du ellers selv kan stå for afhentning?

Mvh.
Valdemar

Hej Valdemar !

Har du fundet en beholder? Jeg er meget interesseret - bare den virker!!!

Mvh. Per  [




quote author=Waldo link=topic=1077.msg8539#msg8539 date=1219592296]
Hej Per,

Jeg skal lige dobbelt tjekke, men mener jeg har en beholder, desværre er den ikke i særligt god stand.

Den skal ikke koste mange DKK, hvis du ellers selv kan stå for afhentning?




Mvh.
Valdemar


[/quote]

jo jag är nog rädd för att jag måste köpa en. vågar inte se på när min rostar sönder och knäcks av  :(
hur mycket vill du ha för den fina bärarmen?  :)

Hmm...

Jeg tænker omkring 1.000 DKK... bøsningerne i den er vist nok allerede presset ud, så den er klar til nye lejer og bøsninger  ;)
Det kan være et meget besværligt job ellers  :(

Standen er ok, uden at være specielt god, men med lidt vedligehold burde den holde en del år  8)

Hej Per,

Har lige kigget efter...

Tror du mener vacuum aktuatoren der sidder i venstre side?

Den har jeg, om den virker ved jeg ikke, men den er temmelig rusten udvendigt  :(

Kan godt teste den imorgen, hvis det ellers er den du mangler?

/Valdemar

jag pm dig om resten
antar att frakten blir en del till sverige även om jag bor i malmö :)

sälj den nu inte till någon annan  ;D

Jeg regner med at køre over broen til DTC i Sturup 6/9, så hvis jeg kan hjælpe må I lige sige til!

Guys, - this is a nice thread, showing how Matra enthusiasts can and will help eachother - I only wish more people could understand the language used in most of the posts.

/Lennart

Ups... sorry  :-[

- Anders 8)

Anders is showing how a good guy he is and offer to transport a reartrailingarm for the murena.

i love this forum  :)

Vem gör inte det?
Who doesn't ?
 
Sorry for spam!  ::)

Google Translator is your friend in these circumstances.  I must say the mixed Danish and Swedish confused me though :)

hey from fredensborg
 i need a middle seatbelt and some contacts for the electrick
windows.
any chance for that

Not sure whether the steel trader have picked up the car yet, if not I have the seat belts...
Window contacts are gone, sorry.

Will let you know tomorrow...

I think we removed the seat belts, didn't we?

By contacts do you mean switches?

Both are gone anyway...  ;)

They are still in the chassis... I didn't remove them when I did the final suspension parts as the rain set in  :(

Chassis gone... a long with the seat belts  :(

Only very few parts left. I have updated the original message at the start of this thread.

Oh... just remembered I got an orig. 2.2 exhaust manifold in great condition, so that's been added to the list  ;)

Hi Waldo

As the manifold still on page 1, do you still have it.

I know it is nearly a year ago since last entrance, but i have a go.

If you have the manifold, do you also have the next piece, from the manifold to the the exhaust (in danish fordeler røret)

Kim

Hello again Waldo.

Are there any parts left of the one that got slaugthered....?

As far as I know after the car-vultures had finished their meal the empty car carcass was send to scrap due to lack of storage space.

If your willing to pay the postage from the I still have bits, what is it you need?

What is it I don't need.....?

All bits'n pieces really. Headlights, transferbar for the headlights, brackets for this one, calipers, both front and rear, discs front and rear, windowlift, cover for airvalve etc.....

Maybe someone is interested in it...

http://annonces.ebay.fr/viewad/piece-de-Matra-Murena/5036717665?bu=http%3A%2F%2Fshop.ebay.fr%2Fi.html%3F_trksid%3Dp4939.m570.l1313%26_from%3DR40%26_sacat%3DSee-All-Categories%26LH_PrefLoc%3D0%26_nkw%3Dmatra+murena

(This is not my auction, I have just found it.)

Or buy a complete Murena with some rather special detail !
http://annonces.ebay.fr/viewad/matra-murena-tuning/5035466929?ru=http%3A%2F%2Fshop.ebay.fr%2Fi.html%3F_nkw%3Dmatra%2Bmurena%26_cqr%3Dtrue%26_nkwusc%3DMarta%2Bmurena%26_rusck%3D1%26_sacat_sel%3DSee-All-Categories%26_trksid%3Dp3286.c0.m1308%26_pgn%3D1%235035466929

Hans

My restauration project proceeds, but I need some parts:

-a pair of inner covers of the taillights (in the boot)
-a vacuum bottle of the headlight mechanism
-an original speaker (the left one is missing  >:( )
-and I still need a pair of side indicators (complete with wiring, connectors and lamp sockets)

When I bought the car the seller told me, that only the vacuum valve of the headlights failed. The actuator was also unservicable and now after removing the bottle I realised it has a leak...   >:(

If someone has any of the needed parts for sale, please contact me.

I have a spare vacuum bottle, send me a PM and we can work it out.

/Anders