I was wondering if its possible to remove the black plastic on the front/rear bumpers to clean them, ive got a few loose areas and moss has grown underneath over the winter... I keep meaning to look but forget when im in/near the car..
You need to remove the complete bumper assembly first to remove all the trim. The full width black rubber is fitted on a metal strip which is held by rivets from the back. The black plastic end trims are held by a small bolt with a plug over the head. You need to remove the plug carefully (if you want to re-use it) and then if it is not totally seized unbolt it, but it may be so bad that you will have to cut it off. (or it may shear if you can get a good grip)
Roy