Title: How to release the console with light, clock, plip etc.
Post by: Jens on February 08, 2009, 01:44:37 pm
How to release the console with light, clock, plip etc. I have found a torx in the middle (inside the console) but it does'nt seem to solve the problem. I need to change a bulb. Does anybody know how to open or get the thing down?
All the best
Jens
Espace J63
All the best
Jens
Espace J63
Title: Re: How to release the console with light, clock, plip etc.
Post by: Lennart Sorth on February 08, 2009, 04:05:32 pm
not much help, - but I have actually done this on my J63 many years ago, - but I cannot remember how. But at ;east you now know it IS possible :-)
Can you prise out the lamp cover and get access to a bolt there ?
/Lennart
Can you prise out the lamp cover and get access to a bolt there ?
/Lennart
Title: Re: How to release the console with light, clock, plip etc.
Post by: Jens on February 08, 2009, 05:06:38 pm
The lamp cover does'nt really look like it's meant to com off. If that was possible I would simply just change the bulb and leave the rest on its place. I have tryed to press on the lamp-cover from above (through the hole)... To me it seems like the glass is glued or a stying part of the console.
Title: Re: How to release the console with light, clock, plip etc.
Post by: renaultbiler on February 09, 2009, 09:21:34 pm
Snap off the plastic surrounding the switches (cover underneath the switches), squeeze it on the sides if i remember it right - then you will find 2 more screws and have a total of 3 screws to drop the whole thing.
Title: Re: How to release the console with light, clock, plip etc.
Post by: Jens on February 09, 2009, 09:30:45 pm
I will try that.
Thanks a lot
Jens
Thanks a lot
Jens
