MatraSport Forum
Each model => Murena => Topic started by: Anders Dinsen on June 05, 2009, 06:42:09 pm
-
There's an initiative to have parts for the Murena side mirrors manufactured on the French Matra-Passion forum:
http://www.matra-passion.com/phpBB2/viewtopic.php?p=65141
I suggest we collect orders here too, or you can post directly on the Matra-Passion forum.
/Anders
-
Maybe the MECUK should hold a stock, or some of the Matra parts suppliers across Europe. I know some people resent the mark-up some suppliers apply, but if the size of the order was increased, prices would come down. It is not always realistic for individuals to hold expensive parts on the off-chance they might be needed. If anyone knows of any forums for Lancia Monte Carlo, then spread the word to them. Most of the cost in this type of project is in the set-up, if we can get the numbers up, we will all benefit.
-
Hello, I make re-make Parts for the Muréna side mirrors in France. The price of the kit is 50 €. 100 Kits are needed to begin. I says you for shipping cost to Danemark. For many information and foto of the kit see MATRA PASSION
http://www.matra-passion.com/phpBB2/viewtopic.php?t=4803&postdays=0&postorder=asc&start=0
Thanks
Franck
-
Franck, thanks for posting here yourself! Shipping will be to Denmark and UK, I suppose.
Pete, You have a good point there. I'll ask the club secretary of the Danish club. Will you ask MECUK?
/Anders
-
Hi All,
I have been in touch with the Monte Forum (I have my speedlines up there for sale).
They are interested but want to know what the repair kit consists of?
Franck - do you have a photo of the kit you supply?
Thanks
Derek
-
:D this is link to a site from a Lancia Monte Carlo, and uses the same mirrors.
http://www.lancia.co.za/?page=article/catalog&catalog=Lancia%20VITALONI%20mirror
Eric
-
Thanks Eric
They agree mirrors are the same and are interested but want to know what the repair kit consists of?
-
(http://i86.servimg.com/u/f86/11/56/96/63/rtro1411.jpg)
13 pieces. 9x gear and 4x backplate.
-
Not really what I was expecting. It's not a lot less than the South African firm charges. What we really need is a replacement for the castings that are so fragile.
-
Are the rubbers easy to buy, if so how much?