MatraSport Forum

Each model => Murena => Topic started by: JL on October 12, 2009, 12:17:28 pm

Title: Brake Master Cylinder
Post by: JL on October 12, 2009, 12:17:28 pm

Hi Guys
Does anyone know if the Volvo 400 series brake master cylinder repair kit has rubbers in the kit that seal the fluid reservoir to the master cylinder?
Thanks
John

Title: Re: Brake Master Cylinder
Post by: JL on October 14, 2009, 08:55:39 pm

Just in case anyone is interested, I have purchased a 400 series repair kit and these seals are included and they work!

John

Title: Re: Brake Master Cylinder
Post by: Matra_Hans on October 15, 2009, 09:52:57 am

Good to know.
Thanks
Hans

Title: Re: Brake Master Cylinder
Post by: Gib on December 02, 2015, 10:52:00 am

Bumping this back up to the top ( keeps topics tidy ). I am part way through the refurb of my brakes and currently need the 2 rubber grommets  that go between the Master Cylinder (MC) reservoir and the MC. As a search has shown there are various alternatives. Trying to be a cheap skate does any one have any part numbers for the following that can be bought as individual grommets rather than rebuild kits? (most are £10-20 as the stocks dry up)
Princess    #####
Volvo 480/ 440    #####
Renault (??)     #####

Also on the reservoir the take of for the clutch has been repaired ( not too badly) but I would like to know if you can get a new one,  or if any one has a good second hand brake fluid reservoir for sale?

Title: Re: Brake Master Cylinder
Post by: JL on December 02, 2015, 10:34:31 pm

You could try CB Motors, they have quite a few Talbot and Simca spares - bit of a long shot but worth a try.

Address: Unit 5, Acton Business Centre, Pool Rd, Nuneaton CV10 9AE
Phone:024 7632 5577
   
Regards
John