MatraSport Forum

Each model => Espace => Topic started by: grasshole on August 26, 2006, 09:54:46 am

Title: stereo loom
Post by: grasshole on August 26, 2006, 09:54:46 am

Does anyone know what the round din type connectors are for(one input and one output i think) on the Philips Hi-Fi Stereo as some idiot has cut the originals off the loom.  As this is my first post i would greatly appreciate any advice, many thanks.

Title: Re: stereo loom
Post by: Will Falconer on August 26, 2006, 12:48:09 pm

Can you be more specific about which model or year  Espace you have?

Title: Re: stereo loom
Post by: grasshole on August 27, 2006, 10:23:28 pm

It is a phase 1 facelift 1990 2lt txe injection 120bhp 8 valve, hope this helps, also what is the extra green connector for in the drivers door loom, regards rob.

Title: Re: stereo loom
Post by: Anders Dinsen on August 28, 2006, 10:27:57 pm

This is for the remote control unit fitted between the instrument panel and steering column. I presume your radio is a big 2U box. Is there a remote control?

I'm not sure about the door connector - do you have power windows? It could be wiring for that.

Title: Re: stereo loom
Post by: grasshole on August 31, 2006, 05:56:48 pm

Hi, there is no remote or steering controls, the stereo is double din size and dates from 85. it was not fitted to the vehicle as i aquired it in new condition off ebay as i believed it to be correct for the model year, the power windows are in perfect working order and there does not appear to be any use for this connector unless there is another switch in the arm for another purpose as there is a hole next to the window switch, ideas welcome please.

Title: Re: wheels
Post by: grasshole on August 31, 2006, 07:16:22 pm

By the way, does anyone know if any other renault alloys will fit my phase 1 1990 facelift , thank you again.

Title: Re: stereo loom
Post by: Anders Dinsen on September 05, 2006, 01:13:31 pm

Quote from: grasshole on August 31, 2006, 05:56:48 pm

Hi, there is no remote or steering controls, the stereo is double din size and dates from 85. it was not fitted to the vehicle as i aquired it in new condition off ebay as i believed it to be correct for the model year, the power windows are in perfect working order and there does not appear to be any use for this connector unless there is another switch in the arm for another purpose as there is a hole next to the window switch, ideas welcome please.

I think it is the control for the electric side mirrors then.

- Anders

Title: Re: stereo loom
Post by: grasshole on September 18, 2006, 08:09:55 pm

I'm afraid not, that is a separate entity altogether, but it is definitely original wiring.