MatraSport Forum

Each model => Murena => Topic started by: lewisman on October 19, 2006, 11:10:13 pm

Title: Fitting a Momo wheel?
Post by: lewisman on October 19, 2006, 11:10:13 pm

The dirty brown steering wheel on the Murena that I have just bought will have to go!  I have a Momo wheel which would look not too bad.  Is there a boss kit available?

Title: Re: Fitting a Momo wheel?
Post by: krede on October 20, 2006, 06:24:26 am

Quote

Is there a boss kit available

My murena is fittet with a momo stearingwheel.. so my guess is... yes!  ;)

Title: Re: Fitting a Momo wheel?
Post by: lewisman on October 24, 2006, 10:21:19 pm

Is it likely to still be available or does anyone have one that they would be willing to sell?

Title: Re: Fitting a Momo wheel?
Post by: krede on October 25, 2006, 12:08:45 pm

Try http://www.simon-auto.de/ . they might be able to help you.
Otherwise the entire steering in the murena is taken from the Talbot Solara.. try asking for that instad.

Title: Re: Fitting a Momo wheel?
Post by: Ralph2 on October 25, 2006, 09:12:32 pm

I fitted a Momo Race to my Murena few years ago. Gorgeous. I could find no one in the UK to supply a boss for the Momo centre, in the end I modified something from MotaLita. Iwasn't too hard, but it would need machining, drilling and tapping.

Title: Re: Fitting a Momo wheel?
Post by: carrera on January 13, 2007, 11:37:03 am

Try Volanti Luisi Italy

Title: Re: Fitting a Momo wheel?
Post by: macaroni on January 13, 2007, 03:34:27 pm

I have a boss but no wheel!

Title: Re: Fitting a Momo wheel?
Post by: michaltalbot on January 13, 2007, 04:50:07 pm

carrera: Yes, in my old Murena I had the Luisi Victor steering wheel and it was looking good. I prefer the original one, but old steering wheel was damaged by sun, so bought this sports steering wheel.
(http://sweb.cz/michaltalbot/auta/Murena/eng.in./D19.JPG)

Title: Re: Fitting a Momo wheel?
Post by: krede on January 13, 2007, 05:07:37 pm

I have a momo stearingwheel in my murena too.. Think the stearing becomes quite a bit Heavier.

Title: Re: Fitting a Momo wheel?
Post by: jos on February 03, 2007, 07:21:32 am

Yup becomes heavier depending on steering wheel diameter of course.
You can fit any steering wheel youd like but need the correct boss and right pcd pattern.
I drilled some holes in one of my bosses  :-X

Title: Re: Fitting a Momo wheel?
Post by: krede on February 03, 2007, 01:04:21 pm

I am considering to try out the old steearingwheel instead of the momo fittet now.. just to see how much the steearing becomes lighter

Title: Re: Fitting a Momo wheel?
Post by: davidewanprice on April 28, 2009, 10:39:59 pm

Has anyone with a momo wheel ever made the horn button work or is that not prossible?

Title: Re: Fitting a Momo wheel?
Post by: lewisman on April 29, 2009, 01:29:43 am

It would be possible but as there is no ring to pick up the contact from the switch it is probaly not worth the hassle.

Title: Re: Fitting a Momo wheel?
Post by: davidewanprice on April 29, 2009, 12:10:31 pm

I was thinking it was like that.. just a thought though!

Title: Re: Fitting a Momo wheel?
Post by: Megatech on April 29, 2009, 08:55:24 pm

The only legal steering boss I know of is an Atiwe, which only has 3 x M8 - and the Momo has 6 x M6.
However, I belive Momo made a steering boss for the Talbot Samba, which also fits the Murena.
Then again, I once noticed, that the Samba and the Peut 205 share the same axis pattern. Then Momo suddenly is an almost legal option.
I think, I have both a Momo wheel and a 205-boss laying around somwhere in the garage - interested?

Title: Re: Fitting a Momo wheel?
Post by: Oskar on April 29, 2009, 09:06:23 pm

Quote from: Megatech on April 29, 2009, 08:55:24 pm

The only legal steering boss I know of is an Atiwe, which only has 3 x M8 - and the Momo has 6 x M6.
However, I belive Momo made a steering boss for the Talbot Samba, which also fits the Murena.
Then again, I once noticed, that the Samba and the Peut 205 share the same axis pattern. Then Momo suddenly is an almost legal option.
I think, I have both a Momo wheel and a 205-boss laying around somwhere in the garage - interested?

hmm what are you saying?  the wheelspacer for 205 will fit murena? :)

Title: Re: Fitting a Momo wheel?
Post by: Oetker on April 29, 2009, 11:46:40 pm

Nardi makes a boss that fits the Murena.
It has a universal fit with  12 holes.
I bought it at Car-joy together with the steering wheel.
(http://img216.imageshack.us/img216/5549/yinyangsmallxn4.jpg)

I am not shure anymore, because I fitted it sometime ago, but as far as I can recall the number was 469 from the catalog.

Title: Re: Fitting a Momo wheel?
Post by: JL on April 30, 2009, 01:14:01 pm

If the Samba boss fits try this link

http://cgi.ebay.co.uk/Talbot-Samba-85on-Steering-Wheel-Boss-kit-1437_W0QQitemZ360113874297QQcmdZViewItem#ebayphotohosting

or this one

http://www.lkperformancestyling.co.uk/catalogue/ektorsteeringwheelbosskits/page/13.html

Regards
John

Title: Re: Fitting a Momo wheel?
Post by: lewisman on May 01, 2009, 11:49:35 pm

I bought a standard Talbot (Alpine/Sunbeam etc) boss kit but it was too short.  I had to make up a spacer to compensate.

Title: Re: Fitting a Momo wheel?
Post by: Oskar on May 04, 2009, 10:26:58 am

the 205 wheel wont fit on murena.  the splines in the 205 wheel are to big.   :(

shame that bosskitt aint shipping to sweden....