MatraSport Forum
Each model => Murena => Topic started by: jos on May 11, 2004, 02:30:32 pm
-
Dear Matraciens,
Currently I drive my Matra with Koni Shocks in combination with Eibach springs ( rear ). Besides Spax and Billstein are there other options ? Especially lowering the rear a bit keeps me busy sometimes.
Any tips ?
Thank you in advance
Jos
-
What is the reason you have replaced the springs ? - length/diameter ?
and are your Koni's height-adjustable ?
-
Dear Lennart,
I replaced rear springs to get stiffer rear ! Koni´s are not height adjustable !
Spax is too expensive and unreliable ( they tend to leak ).
With kind regards,
Jos
-
Politecnic now offers DECARBON shocks. These would make a perfect match if used in the front in combination with rear Koni's.
Just for info.
With kind regards,
Jos
-
Hi
I've been searching a long time for adjustable coil-over shock-absorbers that has a normal price (EUR500 each is WAY above my budget). My best tip so far would be to look at
http://www.raldes.co.uk/ (GAZ)
http://www.dampertech.co.uk/
(I'm going to calculate spring-rates and shock-rates when my new body-panels are finished..)
Other tip ??
- Ketko :-)
-
Hi,
I have also been looking for height adjustable shocks for a long time, but I am quite satisfied with the setup I have now.
I have contacted lots of companies for helping us out on this issue but non of the " famous " brands could help.
Maybe I will go for the DECARBON shocks later ???
I will let you know if anything happens on this side :)
Jos
-
Hi Ketko,
I might have something interesting for you!
Just mail me.
Regards, Theo
-
It´s sometimes nice to have a father with contacts.
He was helping Öhlins out recently, maybe they can help me when i´ve bought a murena :)
http://www.ohlins.se/