MatraSport Forum

Each model => Murena => Topic started by: macaroni on December 06, 2006, 07:33:38 am

Title: Dizzy cap, leads and plugs for 2.2 Murena.
Post by: macaroni on December 06, 2006, 07:33:38 am

I know Matramagic stock the plugs, but can anyone tell me the NGK code for them?

Also, which other, UK-imported, engine would use the same distributor cap and ignition leads as a 2.2 Murena?

Would it be the 505 turbo?

Title: Re: Dizzy cap, leads and plugs for 2.2 Murena.
Post by: krede on December 06, 2006, 09:19:49 am

The 505ti distributer has a hall sensor in it so Im not sure its the same cap either..
But the 2.2 Talbot tagora perhaps?

Title: Re: Dizzy cap, leads and plugs for 2.2 Murena.
Post by: macaroni on December 06, 2006, 08:35:31 pm

OK, just picked up 4 x NGK plugs, rotor arm and Dizzy cap, both Motaquip for less than £10 from my local parts shop. I'll fit them tonight and see if things improve...

Title: Re: Dizzy cap, leads and plugs for 2.2 Murena.
Post by: macaroni on December 06, 2006, 09:29:56 pm

The NGKs that came out of the car were NGKR-8ES and the ones I have just bought are NGK-6ES.

Anyone know the difference?

Title: Re: Dizzy cap, leads and plugs for 2.2 Murena.
Post by: Lennart Sorth on December 06, 2006, 10:29:21 pm

a guess: 'R' for builtin resistor ?
no idea with the difference between 6 and 8 is.
/Lennart

Title: Re: Dizzy cap, leads and plugs for 2.2 Murena.
Post by: Anders Dinsen on December 07, 2006, 01:17:42 pm

Quote from: Lennart Sorth on December 06, 2006, 10:29:21 pm

a guess: 'R' for builtin resistor ?
no idea with the difference between 6 and 8 is.
/Lennart

Heat dissipation:

(http://www.ngksparkplugs.com/images/chartheatratingflowpath.gif)

This is from http://www.ngksparkplugs.com/techinfo/spark_plugs/overviewp2.asp?nav=31000&country=US (http://www.ngksparkplugs.com/techinfo/spark_plugs/overviewp2.asp?nav=31000&country=US)

(was there yesterday evening)