MatraSport Forum

Each model => Murena => Topic started by: darrenheli on June 13, 2008, 09:18:46 pm



Title: Look whot i made today with a hammer and chisel
Post by: darrenheli on June 13, 2008, 09:18:46 pm
Dash Trim


Title: Re: Look whot i made today with a hammer and chisel
Post by: Oskar on June 15, 2008, 09:31:06 pm
nice ;D

bling ;)


Title: Re: Look whot i made today with a hammer and chisel
Post by: Anders Dinsen on June 16, 2008, 04:30:52 pm
Very nice, how do you plan to fit it?


Title: Re: Look whot i made today with a hammer and chisel
Post by: darrenheli on June 16, 2008, 11:40:53 pm
i have removed the standard tin trim , cleaned all the old double sided tape off and put 2 pieces of thin tape and put  it place. it a very good fit , it will not come off by its self. and its much better then the tin one.
ps i didnt use a hammer!!!  i did it at work on a cnc mill


Title: Re: Look whot i made today with a hammer and chisel
Post by: lewisman on June 16, 2008, 11:47:36 pm
Any chance of making me one in plain black? Or in aluminium and I can re-paint it.

Happy to pay for your time and materials as long as it was reasonable....


Title: Re: Look whot i made today with a hammer and chisel
Post by: Anders Dinsen on June 17, 2008, 10:18:32 am
ps i didnt use a hammer!!!  i did it at work on a cnc mill

:P for a moment I thought you had magic fingers or something....

I'd really like one too if you can do it. I may have some Matra Le Coq sportif wheel badges soon to trade in ;)


Title: Re: Look whot i made today with a hammer and chisel
Post by: macaroni on June 17, 2008, 03:11:35 pm
Forget that, we need the fusebox lids!