Title: Replacement Murena rims?
Post by: delorean on October 04, 2008, 01:34:45 am
Is it possible to get NOS rims for the Murena, or are used ones the only option?
Originals are great, they look a lot like DeLorean rims! 8)
But in regards to new replacement rims - Will 6.5J x 16 fit the Murena?
That's the size of the rims from the Rover Streetwise. IMO they look quite nice.
For a photo, see: http://members.home.nl/godriespijkers/rover10.jpg
Best wishes
Stian Birkeland
Norway
Originals are great, they look a lot like DeLorean rims! 8)
But in regards to new replacement rims - Will 6.5J x 16 fit the Murena?
That's the size of the rims from the Rover Streetwise. IMO they look quite nice.
For a photo, see: http://members.home.nl/godriespijkers/rover10.jpg
Best wishes
Stian Birkeland
Norway
Title: Re: Replacement Murena rims?
Post by: krede on October 04, 2008, 08:46:30 am
If you read some of the old posts,there's some pointers as to what will fit the murena.
I don't think 16" wheels should cause any trouble, as long as you can find them in ET:28 and pcd :4x98mm possibly 4x100 will fit if you use wobble bolts.
I don't think 16" wheels should cause any trouble, as long as you can find them in ET:28 and pcd :4x98mm possibly 4x100 will fit if you use wobble bolts.
Title: Re: Replacement Murena rims?
Post by: Waldo on October 04, 2008, 05:00:41 pm
I can confirm that 16x6.5 is a great fit. Have test fitted a set and they are a good size that looks fine on the car...
Rims I use are orig. fiat coupe, but they require a set of spacers :-\
Otherwise you should look for rims that will fit the fiat barchetta (approx. ET 25).
Rims I use are orig. fiat coupe, but they require a set of spacers :-\
Otherwise you should look for rims that will fit the fiat barchetta (approx. ET 25).
If you read some of the old posts,there's some pointers as to what will fit the murena.
I don't think 16" wheels should cause any trouble, as long as you can find them in ET:28 and pcd :4x98mm possibly 4x100 will fit if you use wobble bolts.
I don't think 16" wheels should cause any trouble, as long as you can find them in ET:28 and pcd :4x98mm possibly 4x100 will fit if you use wobble bolts.
