Title: Wheel Bearings Post by: JL on April 09, 2009, 09:32:32 am Am I correct in thinking that an 1983 1600cc Murena has the same (Talbot Solara/Alpine front) front and rear wheel bearings?
Regards John Title: Re: Wheel Bearings Post by: phil75 on April 09, 2009, 11:21:49 am Murena 1.6 & 2.2 front and rear :
dimensions : 80/40/38.2 TALBOT : 0017540300 Quinton Hazell : QWB 231 SKF : VKBA 738 SPIDAN : 0026493 HK : 8016 SNR : R 156.04 (wheel bearing only) SNR : GB 10800 (kit) MGA : KR 3199 delphi : bk246 MOTAQUIP : VBK185 Moprod : BK 302 idem for Solara Title: Re: Wheel Bearings Post by: JL on April 09, 2009, 12:43:32 pm Thanks for quick reply.
Regards John Title: Re: Wheel Bearings Post by: Oskar on April 30, 2009, 12:01:30 pm how much do you pay for one bearing?
here I can find for 66Euros. is that ok? Title: Re: Wheel Bearings Post by: JL on April 30, 2009, 01:58:02 pm Hi Oskar
I paid £11.95 plus VAT(15%) each for Quinton Hazell replacements from a motor factor making 66 Euros sound a bit much. John Title: Re: Wheel Bearings Post by: phil75 on May 07, 2009, 03:28:00 pm Hi Oskar I paid £11.95 plus VAT(15%) each for Quinton Hazell replacements from a motor factor making 66 Euros sound a bit much. John 12£ :o :o :o quickly give the address where you will find at this price is In France between 60 and 80 € each Title: Re: Wheel Bearings Post by: Oskar on May 07, 2009, 04:19:42 pm yes DO IT!!! ;D 8)
https://www.rockauto.com/dbphp/prt,150,QWB231 thats alot ??? Title: Re: Wheel Bearings Post by: JL on May 07, 2009, 04:29:00 pm How many are needed? I will check further availability.
Regards John Title: Re: Wheel Bearings Post by: Oskar on May 07, 2009, 04:50:04 pm hell!!
just orderd 2 from ebay for 20£ each and found this ... http://www1.carparts-cat.com/QH/ skf doesnt make the VKBA 738 anymore :-[ Title: Re: Wheel Bearings Post by: Oskar on May 18, 2009, 07:44:36 pm got the bearings today. looks good. hope they fit ::)
Title: Re: Wheel Bearings Post by: JL on May 18, 2009, 11:18:57 pm They look the same as mine and they all fitted OK. I had to press the old ones out and press the new ones back in. The nuts they supply fit the front only.
Regards John |