Title: Engine out, need new pistons? Post by: LarsB on May 03, 2010, 10:04:45 pm Sad news, was taking out the engine to mount triggerwheel for MS and EDIS, but discoverd (not without surprise) that I will need new bearings, pistons and valveguides.
my cylinders measure 91,74-91,75 my pistons measure 91,56-91,59 +0,10 measures cylinders 91,80-91,807 pistons 9N2 91,76-91,773 N9T 91,74-91,747 Wich pistons are adviseble? Also do anyone have expiriense with K-line valveguide inserts, or should I just get new guides? Title: Re: Engine out, need new pistons? Post by: LarsB on May 03, 2010, 10:16:11 pm (http://img.skitch.com/20100503-q2whewfcy1uwkfgxx6b3tmbh7s.preview.jpg) (http://skitch.com/lars-bjordal/db2dw/p1020289.jpg)
Click for full size (http://skitch.com/lars-bjordal/db2dw/p1020289.jpg) - Uploaded with plasq (http://plasq.com)'s Skitch (http://skitch.com) (http://img.skitch.com/20100503-r185tufd3csibqghxj84fge3xq.preview.jpg) (http://skitch.com/lars-bjordal/db2n1/not-so-nice) Click for full size (http://skitch.com/lars-bjordal/db2n1/not-so-nice) - Uploaded with plasq (http://plasq.com)'s Skitch (http://skitch.com) As you can see I found quite alot of dirt and silicone sealant :( The oilpump inlet was almost blocked by silicone, and large "threads of it hanging on the edges of the gasket |