Title: what bolts for murena rear wheelhub/discs
Post by: Oskar on August 28, 2010, 07:51:49 pm
Ive missplaced the screws for the hub that carries the discbrakes >:(. or maybe I have them but now sure of size etc.
anyone can help with info? now they are on but kinda loose ::) :P
anyone can help with info? now they are on but kinda loose ::) :P
Title: Re: what bolts for murena rear wheelhub/discs
Post by: Philbert on August 28, 2010, 10:35:42 pm
Ive missplaced the screws for the hub that carries the discbrakes >:(. or maybe I have them but now sure of size etc.
anyone can help with info? now they are on but kinda loose ::) :P
anyone can help with info? now they are on but kinda loose ::) :P
Hi Oakar.
Try looking at this post from Oetker, where there are a lot of good photos. I think he also mention the bolt size.
http://www.matrasport.dk/forum/index.php/topic,1591.0.html
Title: Re: what bolts for murena rear wheelhub/discs
Post by: GP on August 28, 2010, 10:49:24 pm
Hi Oskar,
Bolts required are M10 x 1.25 x 24mm length. 3/4 thread. HT 12.9. AF 13mm.
Don't forget the special concave spring washers underneath the heads of the bolts which I know as "bellvue washers" i.d. 11mm. x o.d. 20mm. x 2.6mm thickness. Or make alternative arrangements for securing, Loctite or similar.
Hope this helps,
Regards,
Graham,
Bolts required are M10 x 1.25 x 24mm length. 3/4 thread. HT 12.9. AF 13mm.
Don't forget the special concave spring washers underneath the heads of the bolts which I know as "bellvue washers" i.d. 11mm. x o.d. 20mm. x 2.6mm thickness. Or make alternative arrangements for securing, Loctite or similar.
Hope this helps,
Regards,
Graham,
