Title: Proven way to retract the rear caliper pistons
Post by: yellowt5r on November 22, 2011, 07:43:52 pm
Hi Been reading on here in the search how to retract the pistons to install new pads. was trying for some time and gave up. once again Renault makes thing bloody arkward as normal.
please help as i need to replace them for the Mot re-test soon.
thanks
please help as i need to replace them for the Mot re-test soon.
thanks
Title: Re: Proven way to retract the rear caliper pistons
Post by: RazorbackNOR on November 22, 2011, 09:32:26 pm
On the rear they should be twisted with a steelbar. On the front I guess a normal tool for retracting piston would do.
Title: Re: Proven way to retract the rear caliper pistons
Post by: renaultbiler on November 22, 2011, 10:27:22 pm
Its a quite common construction on rear calippers with handbrake function that they must be twisted and pressed simultanously to push back in. Thats not an akward Renault solution at all!
There are dedicated tools for this virtually anywhere, but you should be able to make it without special tool. Turn clockwise!
There are dedicated tools for this virtually anywhere, but you should be able to make it without special tool. Turn clockwise!
Title: Re: Proven way to retract the rear caliper pistons
Post by: yellowt5r on November 23, 2011, 11:37:00 am
Lol. my volvo never had this function at all So this is new to me. learn something new everyday i guess.
Title: Re: Proven way to retract the rear caliper pistons
Post by: renaultbiler on November 23, 2011, 07:44:31 pm
What can i say, Volvo is an old fashion but expencive Tractor !!
;D
;D
Title: Re: Proven way to retract the rear caliper pistons
Post by: yellowt5r on November 23, 2011, 09:09:01 pm
I have had this 850 t5r estate for 5 years now and have had less to do on it then the espace which ive only had just over a year! and still passes the MOT with no problems. :P
Title: Re: Proven way to retract the rear caliper pistons
Post by: BrianM on November 24, 2011, 10:53:55 am
I had this problem with my alfa 156, one side went fine but the other side was a pig. I used a pair of pipe grips while pushing the piston back. Think i may invest in a tool for the next brake change just to save the frustration :'(
Title: Re: Proven way to retract the rear caliper pistons
Post by: yellowt5r on November 28, 2011, 11:46:23 pm
right to finish this one. This is what i did.
i had to renew the brake fluid so decided to undo the bleed valve on the caliper. Found it released pressure easier just used brake cleaner once finished to tidy it up. put some newspaper on the ground before you start.
Then got a set of grips (5 holes) turned it CLOCKWISE while pushing with my hand to give it some pressure. one side was a little tricky then the other.
TIP: if you use grips when you come near to fully retracting it in mind you dont pinch the rubberdust cover around the piston. ;D
i had to renew the brake fluid so decided to undo the bleed valve on the caliper. Found it released pressure easier just used brake cleaner once finished to tidy it up. put some newspaper on the ground before you start.
Then got a set of grips (5 holes) turned it CLOCKWISE while pushing with my hand to give it some pressure. one side was a little tricky then the other.
TIP: if you use grips when you come near to fully retracting it in mind you dont pinch the rubberdust cover around the piston. ;D
Title: Re: Proven way to retract the rear caliper pistons
Post by: jack daniels on January 08, 2012, 08:15:25 pm
biltema tool 19-234 for about 129sek is perfect
