Title: Engine torque settings Post by: BARRY on December 15, 2011, 08:55:27 pm Hi Guys.
I'm Barry from New Zealand and have a 2.2 Murena. Probably the only one down under. I'm a bit in the dark down here while you guys are in the light. ie. enlightened Matra owners. Could someone please confirm that I have these numbers correct. Head bolt tension 90nm Main Bearing bolt tension 110nm Conrod bolt tension 65nm Inlet valve clearance 0.2mm cold Exhaust valve clearance 0.3mm cold Thanks Barry Title: Re: Engine torque settings Post by: klumzer on December 15, 2011, 09:54:33 pm Hi,
welcome to the forum. Unique country, unique car... :D You can find some answer in this topic: http://www.matrasport.dk/forum/index.php/topic,1015.0.html Unfortunately I do not have a manual so I cannot verify the others... p.s.: There is an Australian member in the forum so now we know two Murenas down under... Title: Re: Engine torque settings Post by: murramor on December 16, 2011, 03:22:15 am p.s.: There is an Australian member in the forum so now we know two Murenas down under... I know of 2 Murenas in Sydney and one in Melbourne. There may be more! Welcome to the group. Where are you in NZ? regards Ron Murrell Title: Re: Engine torque settings Post by: Jon Weywadt on December 16, 2011, 02:35:34 pm Hi Guys. I'm Barry from New Zealand and have a 2.2 Murena. Probably the only one down under. I'm a bit in the dark down here while you guys are in the light. ie. enlightened Matra owners. Could someone please confirm that I have these numbers correct. Head bolt tension 90nm Main Bearing bolt tension 110nm Conrod bolt tension 65nm Inlet valve clearance 0.2mm cold Exhaust valve clearance 0.3mm cold Thanks Barry Hi Barry. Welcome to the forum. I thought this page might have had the torque numbers, but it should also be of interest to you if you have to mount the head. Title: Re: Engine torque settings Post by: BARRY on December 16, 2011, 08:19:56 pm Thanks that's helpful
Title: Re: Engine torque settings Post by: BARRY on December 18, 2011, 02:20:10 am Hi Ron
I'm in Long Bay Auckland Title: Re: Engine torque settings Post by: murramor on December 19, 2011, 03:57:19 am Hi Ron We have friends who live on the Panmure Basin who we plan to visit again at some stage. I'll contact you before we go there next time.I'm in Long Bay Auckland We live in central Sydney although the car is an hour North. Next year is the one for getting it on the road as it will be 30 years old and legally drivable as a LHD car in NSW. regards Ron Title: Re: Engine torque settings Post by: GP on December 19, 2011, 01:33:48 pm Hello Barry,
Great to hear of a Murena in New Zealand. Brilliant! Your valve clearances are correct. Here is a well used scanned compilatation of 2.2 engine fastener torques I was given which should be of help. Merry X-mas from Blighty ;D G.P. Title: Re: Engine torque settings Post by: BARRY on December 20, 2011, 08:33:00 am THANKS GP jUST WHAT i NEEDED
BARRY Title: Re: Engine torque settings Post by: BARRY on December 20, 2011, 08:34:48 am Hi Ron We have friends who live on the Panmure Basin who we plan to visit again at some stage. I'll contact you before we go there next time.I'm in Long Bay Auckland We live in central Sydney although the car is an hour North. Next year is the one for getting it on the road as it will be 30 years old and legally drivable as a LHD car in NSW. regards Ron Look fwd to hearing from you regards Barry Title: Re: Engine torque settings Post by: GP on February 09, 2012, 07:36:40 pm THANKS GP jUST WHAT i NEEDED BARRY Hi Barry, Is your engine up and running yet O.K. ? GP |