Title: inlet manifold and 40 Dellorto carburettors (Murena 2.2)
Post by: krede on July 07, 2015, 07:00:22 am
I have had a set of 40mm dellorto carburettors and an Inlet manifold sitting on the shelf for a couple of years now, and just want to hear if anybody here are interested in buying the set before I put them up for sale elsewhere.
The carbs were running fine with an original "S" cam when I exchanged them for a set of injection throttlebodies. Though they might need a bit of clean up and adjustment.
The Inlet manifold is NOT of the standard "S" type, but instead a cast item , I suspect of polytech origin.
(http://i40.photobucket.com/albums/e242/Christian_Agerbak_Madsen/HPIM0228_zpsvei1qzvz.jpg) (http://s40.photobucket.com/user/Christian_Agerbak_Madsen/media/HPIM0228_zpsvei1qzvz.jpg.html)
The carbs were running fine with an original "S" cam when I exchanged them for a set of injection throttlebodies. Though they might need a bit of clean up and adjustment.
The Inlet manifold is NOT of the standard "S" type, but instead a cast item , I suspect of polytech origin.
(http://i40.photobucket.com/albums/e242/Christian_Agerbak_Madsen/HPIM0228_zpsvei1qzvz.jpg) (http://s40.photobucket.com/user/Christian_Agerbak_Madsen/media/HPIM0228_zpsvei1qzvz.jpg.html)
