MatraSport Forum

Each model => Murena => Topic started by: Gib on October 28, 2015, 02:58:23 pm



Title: Wanted Headlight adjusters -Plastic nut and screw
Post by: Gib on October 28, 2015, 02:58:23 pm
(http://i380.photobucket.com/albums/oo241/gengis-khan/headlight%20adjuster%20screw_zpsgtjynmot.jpg) (http://s380.photobucket.com/user/gengis-khan/media/headlight%20adjuster%20screw_zpsgtjynmot.jpg.html)

Can any body help I need up to 6 of these screws and nuts as mine are well past there prime.


Title: Re: Wanted Headlight adjusters -Plastic nut and screw
Post by: roy4matra on November 08, 2015, 03:19:34 pm
(http://s380.photobucket.com/user/gengis-khan/media/headlight%20adjuster%20screw_zpsgtjynmot.jpg.html)

Can any body help I need up to 6 of these screws and nuts as mine are well past there prime.

Hello James,

Since these are unavailable as far as I'm aware, if you have a full set, then all you need to do is clean them up and refit.  To clean the metal screws you run a die down the threads, and use a tap if necessary in the plastic 'nuts' (I have both taps and dies) and use a file to clean off any burrs.  Refit with grease and adjust.  You shouldn't need to use them much anyway as once they are set, the screws should be tight in the plastic and should stay in position.

Roy


Title: Re: Wanted Headlight adjusters -Plastic nut and screw
Post by: Gib on November 09, 2015, 02:07:03 pm
Thanks thought there might be an outlet or alternative for these. Will have to make at least 2 as they are unserviceable.


Title: Re: Wanted Headlight adjusters -Plastic nut and screw
Post by: Gib on November 10, 2015, 02:58:53 pm
Made my own not the best but will do until I can get a better solution.
(http://i380.photobucket.com/albums/oo241/gengis-khan/20151110_135132_zpsdsvz5gsv.jpg) (http://s380.photobucket.com/user/gengis-khan/media/20151110_135132_zpsdsvz5gsv.jpg.html)