Title: Welding stainless stell to steel
Post by: Lanng on February 27, 2016, 02:04:35 am
Dear fellow BagheeraŽists.
I been away for far to long because of illness and unfortunately its also been playing tricks with my memory - what was I talking about...
I been offered some stainless steel plats (1 mm) and thought they would be good for replacing (rebuilding) the floor plan, boot floor etc but I cant remember if there is any trick to MIG/MAG C02 weld it to the steel chassis of the Bagheera. Is it even possible to weld stainless steel to steel?
Best regards
Lanng
I been away for far to long because of illness and unfortunately its also been playing tricks with my memory - what was I talking about...
I been offered some stainless steel plats (1 mm) and thought they would be good for replacing (rebuilding) the floor plan, boot floor etc but I cant remember if there is any trick to MIG/MAG C02 weld it to the steel chassis of the Bagheera. Is it even possible to weld stainless steel to steel?
Best regards
Lanng
Title: Re: Welding stainless stell to steel
Post by: JL on February 27, 2016, 10:48:37 am
No problem.
http://www.bssa.org.uk/topics.php?article=101
Regards
John
http://www.bssa.org.uk/topics.php?article=101
Regards
John
Title: Re: Welding stainless stell to steel
Post by: Lanng on March 03, 2016, 08:23:23 pm
Thank you for the link!
