Title: Anti Roll Bar / Wishbone gap: Help measuring please.
Post by: Gib on November 28, 2016, 09:09:37 am
As per the drawing below could some body measure to the nearest 1/2cm the gap from the top of the wishbone to the underside of the anti roll bar. I think my home made setup is around 20mm too long as on full droop the end of the steering rack ball joint is touching the anti roll bar.
(http://i380.photobucket.com/albums/oo241/gengis-khan/ARB%20gap_zps4u4z1xlb.jpg) (http://s380.photobucket.com/user/gengis-khan/media/ARB%20gap_zps4u4z1xlb.jpg.html)
(http://i380.photobucket.com/albums/oo241/gengis-khan/ARB%20gap_zps4u4z1xlb.jpg) (http://s380.photobucket.com/user/gengis-khan/media/ARB%20gap_zps4u4z1xlb.jpg.html)
Title: Re: Anti Roll Bar / Wishbone gap: Help measuring please.
Post by: GP on November 29, 2016, 05:34:11 pm
Answer:75mm (depending on how much you compress the standard drop link rubbers).
Title: Re: Anti Roll Bar / Wishbone gap: Help measuring please.
Post by: Gib on November 30, 2016, 09:01:32 am
Thanks for the help.
Current measurement is 120mm so I have to lose 45mm which is doable.
Should have measured and set this up first before making the parts!
Current measurement is 120mm so I have to lose 45mm which is doable.
Should have measured and set this up first before making the parts!
