Title: side window mechanism broken Post by: Bart_Maztra on April 11, 2022, 08:55:35 pm Dear Matra enthusiasts,
My window mechanism just broke. The plastic outer drive tube has snapped off. Just before the bend of the slider. Does anyone have a tip for repairing or replacing? it's the left hand side. And the motor is fine. Thanks Regards, Bart Title: Re: side window mechanism broken Post by: Grapes on April 15, 2022, 12:00:44 pm I think that is more or less what happened to mine on the passenger side. Following this thread with interest.
Title: Re: side window mechanism broken Post by: TELBOY on April 15, 2022, 05:37:48 pm Depends how much room you have and if you have enough existing tube before the break,
I used a 10mm plastic push fit pipe connector. Perfect fit and works great. Title: Re: side window mechanism broken Post by: Grapes on April 15, 2022, 08:18:10 pm Ah that's clever, thanks
Title: Re: side window mechanism broken Post by: Grapes on April 23, 2022, 11:48:48 pm Hope I'm not hijacking this thread but I had a look at my broken passenger side mechanism and found out the tube snapped at the motor so the push fit pipe connector fix won't work in my case.
Would I need to get a whole new assembly including the motor or is it possible and easier to replace the tubing part? It looked like it's part of the motor and not easily detachable. Title: Re: side window mechanism broken Post by: Grapes on April 26, 2022, 02:52:15 pm Just fixed mine with Pattex "ULTRA GEL" which for now honours its name.
Title: Re: side window mechanism broken Post by: Oetker on March 29, 2023, 11:42:31 pm Mine broke several times in the past 15 years.
Both sides on my1.6 are defect again. I'm on a mission tofind a solution. The Skoda felicia/favorite side doors back have the same mechanical system but it was impossible to fit. (https://i.ebayimg.com/images/g/CMoAAOSwLI1aczLI/s-l1600.jpg) Now I am busy to make a system from a subaru. It needs some adjustments but I have good hope. Title: Re: side window mechanism broken Post by: Grapes on March 30, 2023, 12:25:55 am Currently my main issue is that the wiring is a bit shoddy. I hope to be able to replace some of the old wiring to make it work more reliable. Hope it works out with the subaru alternative 👍
|