MatraSport Forum

Each model => Murena => Topic started by: davidewanprice on November 02, 2007, 10:24:34 pm



Title: Speedo Cable
Post by: davidewanprice on November 02, 2007, 10:24:34 pm
I was looking for an electrical problem under my dash and noticed the routing of my speedo cable isnt the best, tangled in other wires and was wondering is it easy to remove from the back of the dash and if so how, if its easy to damage etc, any advice would be good...


Title: Re: Speedo Cable
Post by: Anders Dinsen on November 03, 2007, 09:38:22 pm
It's not too bad. You can pull it off the speedo on the back by pressing the white lock around it and pulling it backwards. But to get it detangled you also need to remove the instrument panel. This is described by Roy in another post, but the trick is to release the screws on the heater panel on the right and then push the instruments forward. It latches in the top and folds over towards the steering wheel column. Release the speedo cable first, so you don't pull it apart - I've done that once :(

All this involves the famous Murena reverse sitting position with the feet towards the roof and the head under the dash :D


Title: Re: Speedo Cable
Post by: davidewanprice on November 04, 2007, 06:35:32 pm
That was easy! just didnt want to twist or pull till i knew what i was doing... thanks for the help


Title: Re: Speedo Cable
Post by: Bart_Maztra on November 18, 2007, 12:42:49 pm
All this involves the famous Murena reverse sitting position with the feet towards the roof and the head under the dash :D

Pictures?????