Title: turn signal and radio wont work
Post by: Oskar on January 26, 2008, 11:22:51 am
ive been trying to clean and fix the 3 connectors under the front hood for possible corrosion. Thin ive done more damage then good...
Which one of them is for turn signal etc?
yesterday it stoped working after MOT ;D :( :-\
Which one of them is for turn signal etc?
yesterday it stoped working after MOT ;D :( :-\
Title: Re: turn signal and radio wont work
Post by: roy4matra on January 26, 2008, 11:47:42 am
The Murena indicators come off a live circuit not an ignition one like most cars. The radio is also fed from a live circuit, so it seems you have either disturbed a live circuit, have blown or a bad live circuit fuse, or you have a bad connection in the live circuit somewhere.
Roy (accurate laminated circuit diagrams available - see club magazine)
Roy (accurate laminated circuit diagrams available - see club magazine)
Title: Re: turn signal and radio wont work
Post by: Oskar on January 26, 2008, 12:14:01 pm
is it number 3 that feeds +12v? and 70 and 70b is earth for right/left ?
just have to find which cableconnector helds number 3 :)
help! :)
just have to find which cableconnector helds number 3 :)
help! :)
Title: Re: turn signal and radio wont work
Post by: roy4matra on February 02, 2008, 07:50:41 pm
is it number 3 that feeds +12v? and 70 and 70b is earth for right/left ?
just have to find which cableconnector helds number 3 :)
help! :)
just have to find which cableconnector helds number 3 :)
help! :)
Circuit 3 is the live to the flasher relay. Circuit 70 is the output to both the hazard and column switches, 70A and 70B feed the warning lights in the instrument panel. The column switch feeds either 72 or 73 (right or left) for indicators or the hazard switch feeds both for hazard flashing.
Roy
