MatraSport Forum

Each model => Murena => Topic started by: bist on February 07, 2008, 06:46:09 pm



Title: Steel head gasket needed - n9t
Post by: bist on February 07, 2008, 06:46:09 pm
Hi everybody
I'v  been looking for proper gasket for about year without succes
All i found was Ajusa, Glaser  and some "home made" ones
With presure above 0.5 bar they just slip in water duct
Engine is not modificated, head has been removed couple of times - is there
a chance that bolts are pulled up

Is there anywhere a steel or strengthend quality gasket like this one
http://www.matramagic.co.uk/product.php?productid=16186&cat=0&page=1
is this firm working anyway

Has anyone tried this http://www.simon-auto.de/matra/deutsch/mur_tuning.htm from Simons
the price is not very promissory (about 40e) , i paid those up mentiond around 20e

Is there someone who can make steel based gasket
For any info i be thankful

Regards



Title: Re: Steel head gasket needed - n9t
Post by: michaltalbot on February 07, 2008, 08:26:43 pm
Run far away from Ajusa!!!

I have the best experiences only with orig. Peugeot 505 Turbo head gasket. Its more expensive, but has a big reserve in pressure resistance and Peugeot is able to deliver it without problems.


Title: Re: Steel head gasket needed - n9t
Post by: bist on February 07, 2008, 09:21:59 pm
Yea, ajusa is far away in a dumpster

but the part dilers I have been contacted here never have and will not have oem one
Im waiting response from peugeot part diler, but not optimistic

Did you find it some local shop or offical peugeot or order from france?


Title: Re: Steel head gasket needed - n9t
Post by: michaltalbot on February 07, 2008, 09:46:25 pm
Its funny - when I say that I want head gasket for Murena or Tagora, they are just watching and asking: "Tago...what?", but when I say Peug 505 Turbo injection, they say that it is too old car, but they are able to delivery it from France.


Title: Re: Steel head gasket needed - n9t
Post by: phil75 on February 08, 2008, 08:20:30 am
still available at Peugeot

reference :  0209.g3

approximately 65 euros


Title: Re: Steel head gasket needed - n9t
Post by: bist on February 08, 2008, 12:33:25 pm
Thanks a lot for posts, Im on chase