Title: Valves
Post by: krede on April 23, 2008, 02:11:04 pm
I know I have it in writing at home somewhere, but can anybody tell me the diameter of the inlet valves? (2.2 engine)
Title: Re: Valves
Post by: Anders Dinsen on April 23, 2008, 04:36:58 pm
About this much:
|<---------------------------->|
Title: Re: Valves
Post by: Anders Dinsen on April 23, 2008, 04:43:18 pm
okok, I had to check. Inlet valve is approx 42 mm and exhaust is 38 mm.
Numbers aren't exact as the valves I'm measuring are still in a head so it's a bit difficult to take a precise measurement, and also I can't take any measurements on the seat or port.
Why? :)
Numbers aren't exact as the valves I'm measuring are still in a head so it's a bit difficult to take a precise measurement, and also I can't take any measurements on the seat or port.
Why? :)
Title: Re: Valves
Post by: phil75 on April 23, 2008, 04:51:38 pm
(http://i41.servimg.com/u/f41/09/01/17/84/s110.jpg) (http://www.servimg.com/image_preview.php?i=2126&u=10011784)
(http://i41.servimg.com/u/f41/09/01/17/84/s210.jpg) (http://www.servimg.com/image_preview.php?i=2127&u=10011784)
(http://i41.servimg.com/u/f41/09/01/17/84/s310.jpg) (http://www.servimg.com/image_preview.php?i=2128&u=10011784)
black round = inlet = admission
round with cross = exhaust = echappement
(http://i41.servimg.com/u/f41/09/01/17/84/s210.jpg) (http://www.servimg.com/image_preview.php?i=2127&u=10011784)
(http://i41.servimg.com/u/f41/09/01/17/84/s310.jpg) (http://www.servimg.com/image_preview.php?i=2128&u=10011784)
black round = inlet = admission
round with cross = exhaust = echappement
Title: Re: Valves
Post by: Anders Dinsen on April 23, 2008, 07:14:27 pm
black round = inlet = admission
round with cross = exhaust = echappement
round with cross = exhaust = echappement
Excellent! 8)
Title: Re: Valves
Post by: krede on April 24, 2008, 08:16:30 am
Indeed Excellent!
Thx :)
Thx :)
