| Home |    Blogs |  Help |  Search |  Login |  Register |   
MatraSport Forum > Each model > Murena > Brake Master Cylinder
 « previous next »
Pages: [1] Print
Author Topic: Brake Master Cylinder  (Read 8234 times)
JL
Sr. Member
****
Posts: 254
« on: October 12, 2009, 01:17:28 pm »
Hi Guys
Does anyone know if the Volvo 400 series brake master cylinder repair kit has rubbers in the kit that seal the fluid reservoir to the master cylinder?
Thanks
John
Logged
JL
Sr. Member
****
Posts: 254
« Reply #1 on: October 14, 2009, 09:55:39 pm »
Just in case anyone is interested, I have purchased a 400 series repair kit and these seals are included and they work!

John
Logged
Matra_Hans
YaBB God
*****
Posts: 661


Owner of Bagheera, Rancho, Murena & Espace
« Reply #2 on: October 15, 2009, 10:52:57 am »
Good to know.
Thanks
Hans
Logged
Gib
Sr. Member
****
Posts: 129
« Reply #3 on: December 02, 2015, 10:52:00 am »
Bumping this back up to the top ( keeps topics tidy ). I am part way through the refurb of my brakes and currently need the 2 rubber grommets  that go between the Master Cylinder (MC) reservoir and the MC. As a search has shown there are various alternatives. Trying to be a cheap skate does any one have any part numbers for the following that can be bought as individual grommets rather than rebuild kits? (most are £10-20 as the stocks dry up)
Princess    #####
Volvo 480/ 440    #####
Renault (??)     #####

Also on the reservoir the take of for the clutch has been repaired ( not too badly) but I would like to know if you can get a new one,  or if any one has a good second hand brake fluid reservoir for sale?
Logged
JL
Sr. Member
****
Posts: 254
« Reply #4 on: December 02, 2015, 10:34:31 pm »
You could try CB Motors, they have quite a few Talbot and Simca spares - bit of a long shot but worth a try.

Address: Unit 5, Acton Business Centre, Pool Rd, Nuneaton CV10 9AE
Phone:024 7632 5577
   
Regards
John
Logged
Pages: [1] Print 
« previous next »
Jump to: