| Home  Blogs Help Search Login Register  
« previous next »
Pages: 1 [2] Print
Author Topic: Front bumper???  (Read 20787 times)
RazorbackNOR
Sr. Member
****
Posts: 494



« Reply #15 on: August 05, 2008, 12:53:26 pm »

Speaking of bumper.. seems like i perhaps have found out why mine is dropping......
Logged

2010 Mazda 3 1,6  Diesel Gunmetal Blue
1983 Matra Murena 2.2 Platine
50cc Pocketbike
IPSC shooter
RazorbackNOR
Sr. Member
****
Posts: 494



« Reply #16 on: August 05, 2008, 12:56:05 pm »

Was looking through Simons catalog now for these parts, can anyone confirm that the two missing pieces which in on the car in this picture are parts 14003 and 14041. on the right side of the car that is.
Logged

2010 Mazda 3 1,6  Diesel Gunmetal Blue
1983 Matra Murena 2.2 Platine
50cc Pocketbike
IPSC shooter
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #17 on: August 05, 2008, 01:51:18 pm »

Looks like they have rusted away and someone has replaced them with a single bar.
I haven't checked the numbers, but you are probably right - it should be the same both sides.

Cheers,
Anders
Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
RazorbackNOR
Sr. Member
****
Posts: 494



« Reply #18 on: August 08, 2008, 09:57:11 am »

Yeah, probably something like that. And if the were a little out of measure that could also explain why the bumper has dropped a little...

Any thoughts on modifying the hinge fastner anyone....?
Logged

2010 Mazda 3 1,6  Diesel Gunmetal Blue
1983 Matra Murena 2.2 Platine
50cc Pocketbike
IPSC shooter
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #19 on: August 08, 2008, 03:26:36 pm »

Any thoughts on modifying the hinge fastner anyone....?

If you grease the thread on the bolt well and soak everything in rust protection when you fit it, it shouldn't be so difficult to get off. The problem is 25 years without any protection - zinc plated bolts will develop a lot of rust in that time. If you use stainless bolts in addition to the protection, you should be safe.
« Last Edit: August 08, 2008, 04:46:55 pm by Lennart Sorth » Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
RazorbackNOR
Sr. Member
****
Posts: 494



« Reply #20 on: August 08, 2008, 04:12:09 pm »

But wouldn't it be better altogether flipping it round, one would have easier access for under the hood, there would be no need for rustprotection, and thus easier to remove for that reason too.  Wink

Had mine been fitted this way in the first plac, im pretty sure i would have no problem inscrewing them now, and probably would't have snapped them either.
Logged

2010 Mazda 3 1,6  Diesel Gunmetal Blue
1983 Matra Murena 2.2 Platine
50cc Pocketbike
IPSC shooter
Pages: 1 [2] Print 
« previous next »
Jump to: