| Home |    Blogs |  Help |  Search |  Login |  Register |   
MatraSport Forum > Each model > Espace > How to release the console with light, clock, plip etc.
 « previous next »
Pages: [1] Print
Author Topic: How to release the console with light, clock, plip etc.  (Read 5699 times)
Jens
Newbie
*
Posts: 7
« on: February 08, 2009, 01:44:37 pm »
How to release the console with light, clock, plip etc. I have found a torx in the middle (inside the console) but it does'nt seem to solve the problem. I need to change a bulb. Does anybody know how to open or get the thing down?
All the best
Jens
Espace J63
Logged
Lennart Sorth
Administrator
YaBB God
*****
Posts: 832



WWW
« Reply #1 on: February 08, 2009, 04:05:32 pm »
not much help, - but I have actually done this on my J63 many years ago, - but I cannot remember how. But at ;east you now know it IS possible :-)

Can you prise out the lamp cover and get access to a bolt there ?

/Lennart
Logged
Lennart.Sorth@matrasport.dk
Murena 1983 1.9i silver // Honda e '20 Charge Yellow  // VW Polo '22 1.0 tsi silver//
Jens
Newbie
*
Posts: 7
« Reply #2 on: February 08, 2009, 05:06:38 pm »
The lamp cover does'nt really look like it's meant to com off. If that was possible I would simply just change the bulb and leave the rest on its place. I have tryed to press on the lamp-cover from above (through the hole)... To me it seems like the glass is glued or a stying part of the console.
Logged
renaultbiler
Sr. Member
****
Posts: 418



WWW
« Reply #3 on: February 09, 2009, 09:21:34 pm »
Snap off the plastic surrounding the switches (cover underneath the switches), squeeze it on the sides if i remember it right - then you will find 2 more screws and have a total of 3 screws to drop the whole thing.
Logged
1980 Alpine A-310 w/GTA 2.5 V6 Turbo
2000 Grand Espace V6 24v Initiale: http://www.renaultbiler.no/forum/viewtopic.php?id=2529
2000 Scenic RXi 2.0 16v IDE aut DP0: http://www.renaultbiler.no/forum/viewtopic.php?id=3751
1982 R20TX 2.2
Service Online: www.servicehefte.net/servdata/?cid=qqkX
Jens
Newbie
*
Posts: 7
« Reply #4 on: February 09, 2009, 09:30:45 pm »
I will try that.
Thanks a lot
Jens
Logged
Pages: [1] Print 
« previous next »
Jump to: