• Welcome to MatraSport Forum.
  • Log in
  • Sign up
 

MatraSport Forum

Simple Machines Forum
Main Menu
Main Menu
  • Home
  • Search
  • MatraSport Forum
  • ► Each model
  • ► Espace
  • ► Engine cut off problem solved

Engine cut off problem solved

Started by Sommerby, July 09, 2009, 10:57:06 PM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

Sommerby

  • ***
  • Full Member
  • Posts: 96
  • Spaceship Pilot
  • Location: Denmark
  • Logged
Re: Engine cut off problem
#15
August 22, 2009, 12:02:37 AM
I feel pretty sure that it in my case is a bad injector (no 2) since the cut out always happens during heavy load.  I will get the injector replaced the 2-09-09 and we will then see if I'm right  :)
To be continiued..........
Best Regards
Bo

Sommerby

  • ***
  • Full Member
  • Posts: 96
  • Spaceship Pilot
  • Location: Denmark
  • Logged
Re: Engine cut off problem
#16
September 08, 2009, 10:56:33 AM
Problem solved.

Injector 2 is now replaced and the Espace is now on full speed again :-)

As I got recomended here on this forum.  Start up with a leak test of the injectors when you get a cut off problem in connection with acceleration. It's a quick and simple test and if one of the injectors leaks considerable more than the others, it's most likely the reason for the problem.

Many thanks to all who commented this tread.
Best Regards
Bo

TheJoker

  • ****
  • Sr. Member
  • Posts: 278
  • Location: Near Oxford
  • Logged
Re: Engine cut off problem
#17
September 08, 2009, 10:58:50 AM
YAY!!!
Grand Espace 2.2 dCi 2001 Silver
KTM 990 SuperDuke R :)
Dead: BMW K1200R

renaultbiler

  • ****
  • Sr. Member
  • Posts: 418
  • Logged
Re: Engine cut off problem
#18
September 08, 2009, 12:51:14 PM
As the injectors are very expencive there is a few Bosch Diesel centers that actually repair these injectors, both totally rebuild and only repairing the return fault. That is if they have the equippment to repair and test injectors - it might be a very reasonable price to get it fixed.
We have one diesel center here that have parts in stock for repairing this at a fraction of the cost for even a overhauled component from Bosch.

And aint it strange ;D that it seems to be the german parts failing in these diesel engines ::)
I dont know about the TDC in the dCi but i replaced TDC for a new genuine one on our Scenic 2.0 16v as a precaution when i bought it, and that was made by Siemens.
1980 Alpine A-310 w/GTA 2.5 V6 Turbo
2000 Grand Espace V6 24v Initiale: http://www.renaultbiler.no/forum/viewtopic.php?id=2529
2000 Scenic RXi 2.0 16v IDE aut DP0: http://www.renaultbiler.no/forum/viewtopic.php?id=3751
1982 R20TX 2.2
Service Online: www.servicehefte.net/servdata/?cid=qqkX

Sommerby

  • ***
  • Full Member
  • Posts: 96
  • Spaceship Pilot
  • Location: Denmark
  • Logged
Re: Engine cut off problem
#19
September 08, 2009, 02:36:45 PM
Those injectors seems to be quite rare in Denmark, but I managed to get 4 secondhand injectors from Ebay.de for 260 euros.

They were all faulty. 3 of them leaked to much and one did not close (caused the engine to sound as a major breakdown and me to think of personal bankrupt :-)

I got one injector total overhauled for 280 euro and that did the trick :-)

Now I hope for some years of troublefree driving. (Wish thinking :-)

Best Regards
Bo 
Best Regards
Bo

renaultbiler

  • ****
  • Sr. Member
  • Posts: 418
  • Logged
Re: Engine cut off problem
#20
September 08, 2009, 04:55:39 PM
www.vedas.no fixes the return fault for aprox 175 euros + shipping for one injector. Parts in stock.
They can also rebuild the complete injector but the price is higher ofcourse.
1980 Alpine A-310 w/GTA 2.5 V6 Turbo
2000 Grand Espace V6 24v Initiale: http://www.renaultbiler.no/forum/viewtopic.php?id=2529
2000 Scenic RXi 2.0 16v IDE aut DP0: http://www.renaultbiler.no/forum/viewtopic.php?id=3751
1982 R20TX 2.2
Service Online: www.servicehefte.net/servdata/?cid=qqkX

Print
Go Up Pages 1 2
User actions
  • MatraSport Forum
  • ► Each model
  • ► Espace
  • ► Engine cut off problem solved
User actions
Print
  • Help | Terms and Rules | Go Up ▲
  • SMF 2.1.6 © 2025, Simple Machines