| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: BAGHEERA 74´  (Read 21483 times)
Matrahenrik
Newbie
*
Posts: 1


I'm a llama!


« on: March 01, 2004, 09:44:24 pm »

WHAT IS THE BEST (easy) WAY TOO GET THE REAR OF AN OLD BAG. LOWERED (10cm.) EVERYTHING IS STUCK Huh
Logged
Lennart Sorth
Administrator
YaBB God
*****
Posts: 832



WWW
« Reply #1 on: March 09, 2004, 12:53:30 pm »

attach a 10 foot iron bar, and sit/jump on it.

no kidding, - and wear earplugs, as it makes a horrible noise.

when reassembling, grease, grease, grease, so it should not happen again.

Logged

Lennart.Sorth@matrasport.dk
Murena 1983 1.9i silver // Honda e '20 Charge Yellow  // VW Polo '22 1.0 tsi silver//
Ols
Newbie
*
Posts: 10


I'm a llama!


« Reply #2 on: March 19, 2004, 01:43:13 am »

Are there same parts on matra baghera and on murena how similiar are these two models?
Logged
Lennart Sorth
Administrator
YaBB God
*****
Posts: 832



WWW
« Reply #3 on: April 05, 2004, 10:29:44 pm »

not very similar.

In general, only the concept is the same, - almost all parts are different. - Keep in mind that there are almost 10 years between the design of the two cars.

Regarding the suspension,  the Bag. has (ex Simca 1100)  torsionbar suspension at the rear, where the Murena has trailing arms , with coil springs, - in other words very different.

Also, since the Murena chassis was warm-galvanized, it is in general much easier to get these things apart, compared to a corroded Bagheera sample.

(Of course, fully maintained Bagheeras are as easy as maintained Murenas, but fully maintained Bagheeras are hard to find)
« Last Edit: April 14, 2004, 11:25:27 pm by Lennart » Logged

Lennart.Sorth@matrasport.dk
Murena 1983 1.9i silver // Honda e '20 Charge Yellow  // VW Polo '22 1.0 tsi silver//
Spyros
Sr. Member
****
Posts: 325

I'm a real donkey!


WWW
« Reply #4 on: April 14, 2004, 09:25:35 am »

Quote
attach a 10 foot iron bar, and sit/jump on it.
Well, Lennart, you just forgot to mention that the screw adjusting the height needs to be unscrewed before that.
Logged
Lennart Sorth
Administrator
YaBB God
*****
Posts: 832



WWW
« Reply #5 on: April 14, 2004, 11:30:16 pm »

true Spyros, - in fact my description is more in order to get the
suspension itself "lowered" (ie taken off the car)

Obviously, since the Bagheera has adjustable torsion.-bar suspension front and rear, it is (at least theoretically) possibly to adjust the rideheight.

However, sometimes you need to apply all you rust-fighting skills, to achieve the result.

Logged

Lennart.Sorth@matrasport.dk
Murena 1983 1.9i silver // Honda e '20 Charge Yellow  // VW Polo '22 1.0 tsi silver//
Spyros
Sr. Member
****
Posts: 325

I'm a real donkey!


WWW
« Reply #6 on: April 16, 2004, 11:43:32 am »

Yes Lennart,
Even if the rear Bagheera suspension was much better than the Murena, unstucking it is a nightmare  Cry

Some details,
If the Bagheera is a 1979 or 1980 model, there should be a nut on the external rotation point of the rear arm. Please undo this also before trying to change the setup.

For the other model, Matra suggested to drill a hole on the little flat surface and to put a grease point over there. (I'll come back with the drilling height) Do it on both side of the arm.

Pay attention not to switch the torsion bars or to put a wrong model (3 different sets).
Logged
Matra_Hans
YaBB God
*****
Posts: 661


Owner of Bagheera, Rancho, Murena & Espace


« Reply #7 on: June 18, 2004, 10:09:58 am »

I restored the rears suspension on my Bagheera 74 some years ago. Everything was stuck. So I cut the ends of the bolts of with an electric saw. The cut was made between the arms themselves and the fixation points on the car. If every thing is stuck you will need new bolts and new silenced blocks anyway.
In order to get the height adjustment working I purchased an additional second-hand set of rear suspension from Simon. On one set I cut away all the aluminium parts, on the other set I cut and drilled out the steel part.
If every thing is stuck and have been corroding (aluminium against steel) for 30 years I think this is the only way to do the job.
Before I assembled the rear suspension I greased everything with cobber grease and installed some greasing nipples.
Good luck with your work
Logged
Spyros
Sr. Member
****
Posts: 325

I'm a real donkey!


WWW
« Reply #8 on: June 21, 2004, 11:02:14 am »

If every thing is stuck you will need new bolts and new silenced blocks anyway.

Hans, where did you find new silent blocks (I mean the silent block around the axis )  Huh
Logged
Matra_Hans
YaBB God
*****
Posts: 661


Owner of Bagheera, Rancho, Murena & Espace


« Reply #9 on: June 22, 2004, 11:35:33 am »

..should have been silent blocks of course.
However I find it amazing how often I am hitting the correct keys on the keyboard and type the correct words considering that I have 10 fingers (and I’m using most of them when I'm typing) and the keyboard has more than 100 keys most of the keys having more than one function.  

regards Hans
Logged
Spyros
Sr. Member
****
Posts: 325

I'm a real donkey!


WWW
« Reply #10 on: June 22, 2004, 04:51:59 pm »

Yes but where were you able to find them ?
  • Delcourt AB pieces ?
  • Simon?
  • Poiltechnique ?
  • Jurgen ?

I was thinking that these part were totaly out of stock everywhere ?
Logged
Pages: [1] Print 
« previous next »
Jump to: