|
Home
|
Blogs
|
Help
|
Search
|
Login
|
Register
|
MatraSport Forum
>
Each model
>
Murena
>
murena restore
« previous
next »
Pages:
1
...
15
16
[
17
]
18
Print
Author
Topic: murena restore (Read 222341 times)
klumzer
Sr. Member
Posts: 370
Re: murena restore
«
Reply #240 on:
January 18, 2013, 07:39:07 pm »
Can anyone tell me, how to set the float level in the carburettor?
Is there any data for it?
Logged
Oetker
YaBB God
Posts: 1097
Re: murena restore
«
Reply #241 on:
January 18, 2013, 11:03:29 pm »
1990 must have been a magical year for Murena's.
My 2.2 was stored from that date till 2007
It was not in a bad state because it was stored in a heated shed.
Logged
I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
klumzer
Sr. Member
Posts: 370
Re: murena restore
«
Reply #242 on:
February 13, 2013, 08:17:21 pm »
I managed to find a nice replacement for the original speakers. A bit higher than the originals but hopefully there is enough space for them in the car.
Logged
Jon Weywadt
YaBB God
Posts: 1002
Re: murena restore
«
Reply #243 on:
February 13, 2013, 09:50:37 pm »
Quote from: klumzer on February 13, 2013, 08:17:21 pm
--- A bit higher than the originals but hopefully there is enough space for them in the car.
---
I replaced the original speakers under the dash in the side wall. The new ones did not fit because they were slightly higher than the originals. I made a 8 mm spacer to lift them out a bit. There is an indentation in the metal side wall for the speaker and obviously you don't want to cut that to make room.
The only problem was that the left speaker required the foot rest to be cut a bit narrower to make room for the grill over the speaker.
Look at my post here:
http://www.matrasport.dk/forum/index.php/topic,1421.0.html
Looking at your photos you may also have problems if it is a speaker in the door. There has to be room for the window to pass down.
«
Last Edit: February 13, 2013, 09:56:05 pm by Jon Weywadt
»
Logged
Matranaut par excellence
klumzer
Sr. Member
Posts: 370
Re: murena restore
«
Reply #244 on:
February 13, 2013, 10:07:37 pm »
I have just gone through your topic... I will see if the new speakers fit or not.
If not then I have new tripes in the house.
But I bought them for bargain price, only 3€.
Logged
Jon Weywadt
YaBB God
Posts: 1002
Re: murena restore
«
Reply #245 on:
February 13, 2013, 10:12:28 pm »
Quote from: klumzer on February 13, 2013, 10:07:37 pm
I have just gone through your topic... I will see if the new speakers fit or not.
If not then I have new tripes in the house.
But I bought them for bargain price, only 3€.
No big los if they don't
The problem with my higher powered speakers was the large magnet that didn't let them fit to the bottom of the cone shaped indentation in the wall. Looks like you will have the same problem.
Logged
Matranaut par excellence
klumzer
Sr. Member
Posts: 370
Re: murena restore
«
Reply #246 on:
March 04, 2013, 06:13:23 pm »
Today my Murena passed the Old Timer qualification exam!
The car was a bit nervous this morning, one of the cylinders did not want to work...
The carburettor still not perfect, but my friend thinks the car only needs a long fast ride...
Unfortunately I have to wait, because it takes about 3-4 weeks to get the registration plate...
«
Last Edit: March 04, 2013, 07:25:11 pm by klumzer
»
Logged
TimS
Sr. Member
Posts: 179
Re: murena restore
«
Reply #247 on:
March 04, 2013, 06:32:14 pm »
Congratulations!
I am still working on mine to get it through the MOT. At the moment sounds like a tractor. Like you i need to adjust the carb and the ignition I think.
Logged
klumzer
Sr. Member
Posts: 370
Re: murena restore
«
Reply #248 on:
March 04, 2013, 07:24:08 pm »
I sent the carb to a specialist, but I think he only changed the gaskets and seals from the repair kit...
So, it still needs some action. I have new sparking plugs in the car, but they may need some cleaning beacuse of the bad carb...
«
Last Edit: March 04, 2013, 08:09:59 pm by klumzer
»
Logged
Oetker
YaBB God
Posts: 1097
Re: murena restore
«
Reply #249 on:
March 05, 2013, 07:47:09 am »
My 2.2 didn't drive for some time and before that only short rides for several years.
It took months to get all carbon out.
Driving it for some time made a significant difference.
Maybe you could use a cleaner, but driving will do the trick to.
Idiot mode on.
a very good medicin but not to good for the engine is to put some brake fluid in the carb.
It will smoke like hell but cleanburn the engine.
I am no fan of this kind of actions but it can help in worst cases.
Best regards Herman
Logged
I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
klumzer
Sr. Member
Posts: 370
Re: murena restore
«
Reply #250 on:
March 05, 2013, 07:29:58 pm »
Is it worth removing and cleaning the sparking plugs or a good ride could clean them?
I have another serious problem. When I washed the car, some water could get into the trunk at the left taillight... now I am drying the carpet...
I am thinking on applying some self adhesive sealing tape on the chassis where the rubber seal touches it. Hopefully it can solve the problem.
There is a sticky plastic tape what would be the best I think, but unfortunately I do not know the exact name of it. We call it "dog meat" ...not easy to get some.
Logged
Oetker
YaBB God
Posts: 1097
Re: murena restore
«
Reply #251 on:
March 05, 2013, 08:36:52 pm »
Original sparkplugs for Murena. very low prices.
http://www.ebay.co.uk/itm/GENUINE-NEW-CHAMPION-SPARK-PLUG-RN7YC-NGK-BPR7ES-/260885592155?pt=UK_Motorcycle_Parts&hash=item3cbdfe385b
The water in the back is in most cases because the rubber around the lights doesn't seal of good.
I used thick layer of mastic kit around it to make it watertight because new rubber didn't tackle the problem.
It is difficult to get it waterproof.
Also the rivets I replaced with nuts and bolts with the same kit.
The corners where the water is guided to the rear-panel license-plate needs attention to.
Nice and dry.
Regards Herman
Logged
I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
klumzer
Sr. Member
Posts: 370
Re: murena restore
«
Reply #252 on:
March 05, 2013, 10:01:14 pm »
Thanks. Really cheap spark plug! Thanks for the tip.
But mine plugs are quite new, they have run less than 10km so they should be good.
This is what I meant (dog-meat), but I did not know the exact English name of it:
http://www.ebay.co.uk/itm/CARAVAN-MOTORHOME-19M-ROLL-SEALING-TAPE-MASTIC-19MM-X-2-5MM-/181075307184?pt=UK_Campervan_Caravan_Accessories&hash=item2a28edeab0
«
Last Edit: March 05, 2013, 10:06:45 pm by klumzer
»
Logged
Jon Weywadt
YaBB God
Posts: 1002
Re: murena restore
«
Reply #253 on:
March 06, 2013, 12:14:05 pm »
How are you doing with the new speakers you told us about earlier?
Logged
Matranaut par excellence
klumzer
Sr. Member
Posts: 370
Re: murena restore
«
Reply #254 on:
March 06, 2013, 04:54:31 pm »
I did not have time to deal with them. As the car was fully retrimmed, I should cut new holes for the speakers on the carpet so I could not check easily if they fit or not. There was a lot to do on the car so I have not installed the radio yet now there is a black blanking plate on the dash.
And I have not got any answer from the steering wheel specialist for my mail.
I managed to buy a Momo Corse which needs new leather, hopefully I will get it in some days. Then I will contact him...
Logged
Pages:
1
...
15
16
[
17
]
18
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General Matra related
-----------------------------
=> Announcements (moderated)
=> General Discussion
=> Marketplace
=> Lennart Sorth's Blog
=> Anders Dinsen's Weber Blog
=> Spyros's MatraSports Page
=> Henrik P's Blog
=> Nickel's Blog
=> Razorback's carb Blog
=> Murena nosecone
=> Oskar's Blog
=> E.space.3
=> Ib's Blog
=> WENs 2 Mk3 Espaces
-----------------------------
Each model
-----------------------------
=> Espace
=> Rancho
=> Murena
=> Bagheera
=> M530
=> Djet
=> Avantime
-----------------------------
Additional features
-----------------------------
=> Native languages
===> MatraSport Danish
===> MatraSport Français
===> MatraSport German
Loading...