| Home |    Blogs |  Help |  Search |  Login |  Register |   
MatraSport Forum > Each model > Murena > Change the crankshaft seal on pulley side? Murena 2.2
 « previous next »
Pages: [1] Print
Author Topic: Change the crankshaft seal on pulley side? Murena 2.2  (Read 4205 times)
ItalyTuning
Newbie
*
Posts: 2
« on: June 27, 2014, 06:23:01 pm »
Can the shaft seal change from the crankshaft right-hand side in the built motor?
I mean the oil seal behind the pulley. Huh
Logged
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3197
« Reply #1 on: June 28, 2014, 10:32:42 pm »
Unfortunately not, since you cannot get the pulley off the engine without taking it out, there is no way to replace the seal.

/Anders
Logged
1982 Talbot Matra Murena 2.2 prep 142 (under restoration)
2017 BMW i3 "Charged Professional" 94Ah
2024 VW id.buzz Pro

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
Pages: [1] Print 
« previous next »
Jump to: