| Home  Blogs Help Search Login Register  
« previous next »
Pages: 1 [2] Print
Author Topic: Murena master brake cylinder  (Read 16704 times)
variator
Full Member
***
Posts: 95


-83 Matra Murena 2.2


« Reply #15 on: February 13, 2015, 07:49:24 pm »

The cylinder was purchased as an experiment, but after having installed it  it remains there!
Everything works perfectly and the mounting flange angle is correct.

Terje
Logged

2001 Saab 9-5 2,3T, 1981 Porsche 928, 1981 Honda cb 900 F, 1968 Triumph Trophy TR6R, 1986 Yamaha RD 350 YPVS
Oetker
YaBB God
*****
Posts: 1097



« Reply #16 on: May 17, 2016, 07:27:39 pm »

OK investigation tells it's not the correct brake master cylinder.
Ordered a set 20.64mm revision kit for the 405.



Compared it with the original Bendix master.




Also springs are different.



I would not use it as my master cylinder.
It's totaly different.
Is it totaly useless?
No, I used all rubber from the kit to revive the original Bendix.

This investigation leaded me to the fact this rubbers are used on a wide range of cars.
Also found the rubber kit named D1056 from Seinsa.
If you start looking for that number you find several replacements.


Regards Herman
« Last Edit: May 17, 2016, 07:30:08 pm by Oetker » Logged

I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
Pages: 1 [2] Print 
« previous next »
Jump to: