| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: What engine to fit?  (Read 11814 times)
typhoon
Newbie
*
Posts: 3


I'm a llama!


« on: December 27, 2004, 12:58:48 pm »

I want to swap my 1,6 engine with a bigger and/or powerful one. Which engines can be used with the least modifications needed?
Logged
Lennart Sorth
Administrator
YaBB God
*****
Posts: 832



WWW
« Reply #1 on: March 14, 2005, 12:17:19 am »

Which engines can be used

I have a Peugeot 205 1.9 8v GTI engine in my 1.6 (1983),
or rather: I had, as it is currently out, due to a crankshaft  bearing failure :-(  

Left engine mounts is unmodified

RIght enginemount has a little special bracket

bottom mount is a rod, running at an angle, to connect the chassis mountpoint with the engines mountpoint, which on the XU9 JA engine is about 20cm further to the right.

driveshafts are welded together, - Peugeot inner, to Matra outer. Have had no problems with the welds for the 100.000km I'v done
over the last 5 years.

« Last Edit: March 19, 2005, 12:02:34 am by Lennart » Logged

Lennart.Sorth@matrasport.dk
Murena 1983 1.9i silver // Honda e '20 Charge Yellow  // VW Polo '22 1.0 tsi silver//
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3192



« Reply #2 on: March 14, 2005, 06:13:48 pm »

Is the 205 GTI engine any different from the 1.9 litre from the 405?
Logged

1982 Talbot Matra Murena 2.2 prep 142 (under restoration)
2017 BMW i3 "Charged Professional" 94Ah
2024 VW id.buzz Pro

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
Pages: [1] Print 
« previous next »
Jump to: