| Home  Blogs Help Search Login Register  
« previous next »
Pages: 1 [2] Print
Author Topic: Best tyres to buy in original dimension?  (Read 3704 times)
Mattias Henriksson
Newbie
*
Posts: 12


« Reply #15 on: October 21, 2019, 01:26:57 pm »

Thanks for your advise and I agree a Murena should have more classic type of wheels. I found a set of Aluline wheels that need sandplasting and some paint, see attached photo with the same type.
Dim 7x15 and ET 13 but the bolt pattern is 100x4, think it can be solved with special bolts to compensate for the 2 mm differance. Centrum hole is 57,1mm so it needs some machining up to 58,1 but that can be solved. Will use tyres with dim 195/205 in 50-profile.
Logged
GP
Sr. Member
****
Posts: 265



« Reply #16 on: October 21, 2019, 02:19:22 pm »

Oooh they are nice!  Smiley
Logged
Oetker
YaBB God
*****
Posts: 1090



« Reply #17 on: October 21, 2019, 04:35:01 pm »

Murena has ET29.
Ithink ET  13 wil do but not sure.
50 height front wil be OK.

I have 45 front and 55 rear and 7J ET25
It has good dirve abillity because the car is more wedge.

Wheel look good.
« Last Edit: October 21, 2019, 04:38:53 pm by Oetker » Logged

I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
GP
Sr. Member
****
Posts: 265



« Reply #18 on: October 21, 2019, 06:08:08 pm »

That's very interesting as I did not know that special bolts / "Wobble Bolts" even existed!

https://www.team-bhp.com/forum/tyre-alloy-wheel-section/168043-pcd-variation-bolts-aka-wobble-bolts-myth-versus-reality.html
Logged
matramurena
Sr. Member
****
Posts: 102



« Reply #19 on: October 22, 2019, 09:08:05 pm »

Those are some nice rims! Wil look nice and wide as well with an ET of 13! Wobble bolts work very well, just make sure you buy a decent set and that the centre-hole fits snug with your hub.
Logged

1983 Matra Murena V6 (AR engine)
2003 Matra Avantime 2.0T Expression
2003 Matra Avantime V6 Privilege
Mattias Henriksson
Newbie
*
Posts: 12


« Reply #20 on: October 28, 2019, 09:01:45 am »

Also found these new wheels from Japan racing during my search on internet...
Have an nice style with a classic touch with the cross spoke pattern that I think would fit the Murena. Available in 4x98 with centrum hole 58,1 in dim 8x15, ET20.
Will be the same money as for the Aluline that I bought with machining, sandblasting, powdercoating and new bolts...so I have to think about it!

// Mattias
Logged
GP
Sr. Member
****
Posts: 265



« Reply #21 on: October 29, 2019, 12:03:52 pm »

These are my posh "going out" wheels!  Grin
Logged
Mattias Henriksson
Newbie
*
Posts: 12


« Reply #22 on: October 31, 2019, 01:50:52 pm »

Very nice wheels!! Dimensions?
Logged
GP
Sr. Member
****
Posts: 265



« Reply #23 on: November 01, 2019, 09:46:35 pm »

Application: Delta Integrale 16v Only
Size: 7" x 15"
Offset: ET27
PCD: 4 x 98
Centre Bore: Matra Murena

Tyres Front: 195/50VR15
Tyres Rear: 205/50VR15
« Last Edit: November 01, 2019, 10:23:49 pm by GP » Logged
Pages: 1 [2] Print 
« previous next »
Jump to: