| Home  Blogs Help Search Login Register  
« previous next »
Pages: 1 2 [3] Print
Author Topic: Time to do some repairs  (Read 1392 times)
Moes
Sr. Member
****
Posts: 153



« Reply #30 on: February 18, 2020, 12:38:14 pm »

The past weekend I had planned to do some welding, sanding and cleaning of the chassis. I startet out just fine, but of course after not having the bottle of inert gas replaced on my welding unit in years I ran out of gas on Saturday, so no more welding that weekend..   

The air ducts from the engine compartment was both cracked under the trunk, my guess is that it is due to vibrations over the years. I did get it repaired on one side (before I ran out of inert gas), and I welded in a piece to reduce future vibration movement.

I hope to be done with the welding, sanding and cleaning of the chassis by next weekend, so that I can get started on priming and coating.  At that point my garage will need a thorough clean up from all the dust! before I start the assembling.     

Best regards Frederik
Logged
Anders Dinsen
Administrator
YaBB God
*****
Posts: 2993



WWW
« Reply #31 on: February 21, 2020, 07:22:46 am »

Very nice work!!!
Logged

'82 Murena 2.2 prep 142
'01 Grand Espace 24v
'08 Smart Fortwo 0,8 cdi
Pages: 1 2 [3] Print 
« previous next »
Jump to: