| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: Brake master cylinder  (Read 8203 times)
Matra_Hans
YaBB God
*****
Posts: 661


Owner of Bagheera, Rancho, Murena & Espace


« on: August 10, 2007, 07:13:39 pm »

Hi
My Rancho has now been on the road for 2 ¾ years in its second life. The original brake master cylinder gave up after a few months and a new from Simon was installed. But earlier this year the new master cylinder stopped working. I complained to Simon (to no avail) and ordered once again a new master cylinder. However no more master cylinders for the Ranch are available!
During my holiday back in Denmark I searched through my store of spares and located 3 Rancho master cylinders, and I fitted the “best looking” in the Rancho and it is working fine.

But having a not functioning and almost new master was nagging me and I was also thinking of the next time I needed a new master cylinder and non will be available. So I took the almost new master cylinder apart, and one of the rubber seals had disintegrated. I took the piston and the rubber seal in my pocket to the Biltema spare part store which is self serviced. The shop had repair sets for the brake master cylinder for only 4 different cars, so I opened the different boxes and tried if I could find any rubber seal of the same dimension as the one from the Rancho. One of the rubber seals for a Mercedes had the correct dimensions. In total there are 5 identical rubber seals in the Rancho master cylinder and there are three in the repair set for the Mercedes, however I only changed the one damaged seal.

The Mercedes models in question are 190 W201 83-90, 200 123-series 76-85 and 200 W124 85-93. For the few Rancho owners in Scandinavia the Biltema part number is 66-708.

The price for the repair set is 6.50 Euro while a master cylinder which Simon was able to get from a French workshop (but it newer arrived) would had been 275.00 Euro

Regards Hans
Logged
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3198



« Reply #1 on: August 10, 2007, 08:09:02 pm »

That's a very nice tip, Hans. Off topic, last year I also found a repair kit with new seals for the Murena 2.2 clutch master cylinder in Biltema. Price compared to a new cylinder was about the same as you have experienced. I like Biltema's concept, and their products are usually in good quality.

- Anders
Logged

1982 Talbot Matra Murena 2.2 prep 142 (under restoration)
2017 BMW i3 "Charged Professional" 94Ah
2024 VW id.buzz Pro

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
Pages: [1] Print 
« previous next »
Jump to: